Right Position Miter Gearbox Standard Features
Dimensions: right angle miter gear drive is 3-21/32″ x 3-15/16″ x 1-1/4″ deep
40% glass filled polypropylene
Weight: 10 ounces
Shafts: Ground high-tensile metal. Any shaft can be utilized as a drive.
Gears: Hardened straight miter gears
Bearings: Hardened metal ball bearings, long lasting lubrication
Mounting: Three shaft mounting positions provide versatility in application
Versatile: Three shaft connections are given for versatility in application
RAB-1 could be operated CW, CCW or Back again driven
RAB-1 is rated at 1/3 HP in 1800 RPM. Maximum rate is 3000 RPM
Benefits and Cost Savings
Longer service life
Greater tooth-to-tooth contact
The most effective power transfer design under rated load conditions
Stainless shaft (Make sure you specify series stainless required)
Longer shafts lengths upon input and output
Right Angle Drives Made out of Advanced Quality Construction
Ever-Power 2-Way Right Position Gearboxes transmit power with noiseless, dependable spiral bevel gears. These premium bevel gearmotors feature hardened spiral bevel gears and nonmagnetic stainless-metal shafts. Our Two-Way 90° Gearboxes are also compact and feature multiple mounting options. The fully enclosed design guarantees the integrity of the internal gears.
Additionally, the cast aluminum housing of Ever-Power s premium quality Right Angle 2-Way Gearboxes are created for maximum strength and heat dissipation. The drives can be found with shafts of 3/8”, 1/2″, 5/8” and 3/4″ diameter in both 1:1 and 2:1 ratios. We are able to quote several unique types of shafts as well, including:
Two Way 90 Degree Gearbox Applications
Ever-Power Right Position Miter Gearboxes are used throughout dozens of industries in hundreds of applications. Any make use of that demands the reliable transfer of speed or power, you could find a two-way gearbox bearing the Ever-Power brand. The compact design of Ever-Power Two-Way Right-Angle Gearboxes makes them ideal for applications such as for example:
Food Processing Equipment
Ovens & Dryers
Power Transmission Equipment
Ever-Power Inc, providing the most reliable and reliable transfer of power out there. Our company is well known for its innovative styles and producing high-quality motion control solutions designed for engineered performance and durability. We offer a range of gearbox styles and a broad selection of versatile shaft couplings to provide you with a complete solutions for your mechanical and power transmission applications.
Right Angle Gearbox
Right angle gearboxes are characterized by the fact that the drive shaft and the output shaft are arranged at an angle of 90 degrees. With respect to the gearbox type, the axes can intersect in a plane or cross on two parallel planes, which results in an axis offset.
Correct angle gearboxes are noticed with different types of gear teeth or a combination of different gearing types. The most famous single-stage gearbox types are bevel and worm.
Because of the high solitary stage ratios and the low effectiveness level, worm gears can achieve a self-locking impact. With worm gears it is also possible to have a hollow shaft as the drive shaft.
Bevel gearboxes come with different types of gearing. Bevel gearboxes with intersecting axes are realized using bevel gearing with directly, helical or spiral teeth. Hypoid gearboxes have helical bevel gearing with that your axes cross with an axis offset. The bandwidth of technically practical ratios with that your bevel gear stage can be realized is bigger with hypoid gearboxes than with the classical bevel gear teeth.
Bevel gearboxes may also be combined with various other gearbox types. A frequent application in this respect may be the mixture with a planetary gearbox, whereby the planetary gearbox can be connected upstream or downstream. This outcomes in an array of overall multiplication elements and wide variety of uses in many industrial applications.
The efficiency level of bevel gearboxes is typically lower than that of coaxial spur gearboxes, particularly in comparison to planetary gearboxes. This is because the bevel gear stage generates a higher degree of axial force and radial force, which has to be absorbed by appropriate bearings. This increases the power loss, which is particularly significant in the drive stage of the gearbox.
The running noise and the transmittable torques of classic bevel gearboxes are also less than with single spur equipment teeth. Hypoid gearboxes, on the other hand, are extremely noisy and may transmit large amounts of torque, but a considerable amount of bearing load happens in the bevel equipment stage of these gearboxes.
In summarizing, a right angle gearbox is always used when the amount of installation space in the application form is bound, or an angular arrangement between your drive and the output is necessary by the application. Also, they are used in instances where in fact the input shaft needs to be hollow to be able to lead through lines or use clamping sets.
The advantages of right angle gearboxes:
Use when set up space is limited
Can be combined with other styles of gearbox
Quiet and high amount of torque when working with hypoid gearboxes
Edition with hollow shaft possible
The disadvantages of right angle gearboxes:
Lower performance level than planetary gearbox
Lower torques in single-stage ratio range
The Ever-Power, the original right angle gearbox drive, is widely recognized and is used worldwide. The Ever-Power provides manual or power transmitting of rotary motion in a COMPACT, standardized right angle unit.
Our standard type of bevel gearboxes can be found from share in both an ” and Metric Series, single or dual output shafts, 1:1 or 2 2:1 ratios, and grease lubricated forever and also have an operating temperature selection of – 65 degrees F to + 200 degrees F ( – 54 degrees C to + 93 degrees C). Making use of carburized case-hardened Coniflex* bevel gears, all Ever-Power units utilize completely enclosed & sealed ball bearings.
The cast aluminum housings on our 90 degree gearboxes are precision machined, upon our CNC machining center and then coated with a chemical film to protect the materials, and use flanged ends and side bosses for compact installation in an array of applications.
The shaft material used for sizes 1, 2 and 3 is #416 stainless. On the 2 2:1 models, the pinion shaft can be carbon metal. For the sizes 4 & 5, the material is dark oxide carbon metal. Shafts can be provided with particular extensions (with flats, splines, holes, etc.) and /or specific lengths upon demand.
In addition to your standard versions, we will modify our units to meet your design specifications! Our sales and engineering departments will be ready to assist you with your specific application requirements.
Through the years we’ve received questions about nearly every part of the gearbox selection process. One of the questions we’ve had several times is, “Exactly what is a right-position gearbox or a right-angle drive?” Or, more particularly, “How can be a right-angle gearbox or drive not the same as a speed reducer or other types of gearboxes?”
First, let’s start with some fundamental terminology. It is not uncommon for the conditions “gearbox”, “drive” and “speed reducer” to be used interchangeably.
A gearbox is any device that runs on the gear train to transmit torque/rpm and whatever uses a gear to transmit torque/rpm is a gearbox.
A right-angle drive is a system with a gear train that can transmit torque/rpm 90 degrees, to turn a corner
A gear reducer is a system with a gear teach that may reduce rpm output. Due to decreasing rpm is raising torque at the same ratio acceleration is reduced.
A gear box can also be a speed increaser
The kind of gear used in the gear box defines it as a right angle or an inline drive.
A worm gear drive is a right-angle drive since is a bevel gear
A spur equipment drive is inline
A helical equipment is inline but can also be a right-angle drive
So, what is a right-angle gearbox?
A right-angle gearbox is a gearbox with a right-angle change in direction of the shaft. It can be a 1 to 1 1 ratio or a multiple of just one 1 such as for example 2:1 or 15:1. If the ratio is 1:1 it is a right-position drive. If the ratio is certainly greater than 1:1 it is a right-angle velocity reducer.
High torque ball bearing design
Solid one-piece aluminum housing seals gears from outdoors contaminants for smooth operation
Right- or left-hands rotation to convert power either direction
Quickly slides axially along the drive or driven shaft for flexible positioning
Alloy steel helical gears for powerful
Built in 5 sizes with three types of result shaft : hollow, projecting or double-extended. Moreover, yet another output shaft could be installed reverse to the insight shaft.
Three input types are available : with projecting input shaft, with pre-manufactured motor coupling (bell and joint) and pre-engineered Small motor coupling.
Gear device body in engineering cast iron, EN GJL 200 UNI EN 1561 ribbed internally and externally to guarantee rigidity and machined on all areas for easy positioning. The single lubrication chamber ensures improved warmth dissipation and better lubrication of all the internal components.
The mechanism of these gearboxes includes two Ever-Power spiral bevel gears with precision lapped profile, 16CrNi4 or 18NiCrM05 manufactured from steel.
The use of high quality bearings on all the axis ensures long life to the gearbox and allows very high radial and axial loads.
Gearbox casing, flanges, bells and covers are externally painted with BLUE RAL 5010.
Right Position Miter Gearbox Standard Features