worm gear speed reducer
Single reduction worm gearing offers high ratio reduction with few shifting parts in a close-coupled compact drive. The proper angle set up of driving-to-driven machine takes a the least space. Input and output shafts can be extended in either or both directions in horizontal or vertical plans adaptable to any installation requirement. Efficient electric motor speeds are reduced to gradual speed requirements of several industrial machines in a single reduction.
Product Features
Ratios 5:1 to 70:1
Hollow & Solid Output Shafts
Vertical & Horizontal Mounting
Fan Cooled (Standard)
Motor Mounts (C-Face Adapters or Scoops)
Cast Iron or Metal Housings
Products
The exclusive usage of the involute Helicoid Thread form (with leaving side contact) on the worm and gear offers high efficiencies, and lengthy service existence. The hardened floor and polished alloy steel worm develops a soft, work hardened surface on the bronze gear. For this reason worm gears use in and improve with prolonged service while other gears are wearing out. Ever-Power offers a wide selection of model configurations, sizes, ratios, and accessories from our standard products.
Fabricated Designs
If your application involves serious shock loads or feasible housing damage from external sources (as in steel mills or mobile tools applications) Ever-Power can provide fabricated steel housings with up to 48″ center distances. Fabricated housings provide optimum rigidity and strength which allows the tranny of higher horsepower amounts than are feasible with regular cast iron models. Extra heavy side plates connect the worm and equipment shaft bearing facilitates, assuring proper meshing of the gear under all load conditions. In smaller sizes, fabricated steel reducers are interchangeable with Ever-Power standard cast iron reducers.
Custom Designs
Ever-Power can offer custom acceleration and reversed engineered reducers for your application, be it a new project or a primary drop-in alternative to a competitor’s speed reducer. Fabricated metal reducers enable Ever-Power to match a competitor’s footprint, centerline, and shaft height allowing a direct drop-in replacement saving the client time and money.
Long – Quiet Life
All worm gears in Ever-Power reducers are manufactured from phosphorous bronze. Our design also incorporates a hardened, floor and polished alloy steel worm. This mixture develops a easy, work-hardened mating surface area of the bronze equipment which enhances with prolonged service.
Worm gearing is a class of equipment reducers that utilizes correct angle, nonintersecting shafts. This form of reducer provides simple and quiet procedure and permits the probability of large rate reductions. These gears can be found from stock in a wide variety of ratios, from as low as 4:1 up to 3600:1. The small design and structure allows worm equipment reducers to be placed in a relatively small space. Thus, very high reductions in a restricted package size may be accomplished with this configuration. Our worm equipment features the continuous sliding tooth actions between worm and one’s teeth. This escalates the tolerance for heavy loads and shock loads. Worm gear drives provide users high reducing convenience of relatively low cost in comparison with some other types of gearing.
The usage of worm gearing extends across many industries including food, beverage and grain and has many applications. Some applications that utilize worm gearing are: conveyors, mixers and bucket elevators.
Ever-Power worm gear reducer gearbox series bottom on years of experiences uses designed teeth surface area with unsurpassed torque transfer overall performance with great efficiency, efficency and cost.Worm gear program transmits power through sliding get in touch with, leading to extremely low vibration , noise, small backlash and self-locking property
-Housing:One time we casting creats great rigidity for serious impacts. Outer cooling fins and internal lubrication oil diversion channel design to increase heat dissipation.
-Worm Shaft: Manufactured with Carbon alloyed Metal S45C or SCM415, precison machined and carburized to HRC45 or HRC60, after that for precision tooth grinding to ensure maximum contacting.
-Worm Wheel: Manufactured with Carbon alloy ALBC2, teeth are machined by precision CNC hobbing machine to sustain high impact.
A worm gear reducer is one type of reduction gear container which includes a worm pinion input, an output worm gear, and includes a right angle output orientation. This type of reduction gear package is generally used to have a rated motor speed and produce a low speed output with higher torque value based on the decrease ratio. They often times can resolve space-saving problems because the worm equipment reducer is among the sleekest decrease gearboxes available due to the small diameter of its result gear.
worm gear reducerWorm gear reducers are also a favorite type of acceleration reducer because they offer the greatest speed decrease in the tiniest package. With a high ratio of speed decrease and high torque output multiplier, it’s unsurprising that many power transmission systems make use of a worm equipment reducer. Some of the most common applications for worm gears are available in tuning instruments, medical assessment equipment, elevators, security gates, and conveyor belts.
SW-1 and SW-5
Torque Transmission offers two sizes of worm equipment reducer, the SW-1 and the SW-5 and both are available in a range of ratios. The SW-1 ratios include 3.5:1 to 60:1 and the SW-5 ratios include 5:1 to 100:1. Both of these options are produced with tough compression-molded glass-fill polyester housings for a long lasting, long lasting, light weight speed reducer that’s also compact, non-corrosive, and nonmetallic.
Features
Our worm gear reducers offer an option of a solid or hollow output shaft and feature an adjustable mounting position. Both SW-1 and the SW-5, nevertheless, can withstand shock loading better than other reduction gearbox styles, making them ideal for demanding applications.
Rugged compression-molded glass-fill up polyester housing
Light-weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Solid or Hollow output shaft
Adjustable mounting position
Worm Equipment Reducers also known as worm gearbox or worm velocity reducers. Worm equipment reducers are utilized for speed decrease and increasing the torque for electric motor drives. You can choose to mount your NEMA electric motor to the reducer by using the NEMA C face flange or make use of a coupling. If you need a coupling for the output or input shaft observe our coupling section for selecting a coupling. We offer four assemblies left hand and right hand and double output shaft and shaft insight and shaft result. Interchangeable with most worm gear manufactures. See data sheet in product overview for diamensions. If you don’t see your type, please Contact Us.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Design for OEM Replacement
Double Bearings Applied to Both Shaft Ends
Anti-Rust Primer Applied Inside and Outside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Steel Shafts
Flange Mount Versions for 56C and 145TC Motors
Ever-Power DDVM series triple-reduction worm gear quickness reducers are available in ratios from 5000:1 to 175,000:1 and middle distances from 7” to 20” (larger sizes on request). Output torque ranges from 33,000 in pounds. for the 7” CD DDVM-70 to 582,900 in lbs for the DDVM-200. Mechanical HP insight requirements are from 0.09 HP for the 175,000:1 7 in CD reducer to 6.25 HP for the 5000:1 20” CD unit. These reducers are available in four configurations: horizontal, vertical, shafted, and shaft mounted.
These reducers are ideal for water/waste-water equipment drive applications such as thickeners and clarifiers, which require a vertical down shaft. Other offered configurations also make Ever-Power triple reduction reducers perfect for make use of on mixers, elevators, solar power panels, astronomical telescopes, indexing tables, hoists, conveyors, or various other process or components handling systems where large torques/sluggish speeds are needed.
These reducers are also offered with a helical major reduction stage and so are termed the HDVM series
Product Features
Ratios 5000:1 to 175,000:1
HP from 0.09 to 6.25.
Output Torque to 583,000 in lbs.
Output RPM as low as 0.01 with a 1750 RPM input.
Ideal for ultra-slow quickness, high torque applications
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Applied to Both Shaft Ends
Anti-Rust Primer Applied Inside and Outside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Versions for 56C and 145TC Motors
Description
The HDR Series worm gear reducers are found in low to moderate horsepower applications to lessen speeds and increase torque. Worm gear reducers are available in direct or indirect drive, direct drive models are 56C or 145TC flange attach with either right, remaining or dual output shafts or a hollow bore output. The indirect drive models are shaft input-shaft result boxes for use with sprocket or pulley drive systems. They provide an effective low cost solution to speed reduction and increased torque, with higher tolerances for shock loading than helical gear reducers.
In order to decide on a gearbox speed reducer, you will need to determine the mandatory torque and assistance factor for the application form. Click on “Specs” above for a desk that will aid in determining the service element. For service elements above 1.0, multiply the mandatory torque by the assistance factor.
Our standard 700 Series – the heart of Ever-Power speed reducer products – has been serving industry reliably for over 40 years. Its tested modular design has set the market standard for performance and is the most imitated product in today’s worm gear swiftness reducer marketplace. But why settle for a knock-off when you can have the initial – from Ever-Power.
Specifications
11 basic solitary reduction sizes
8 basic double reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow result bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
Product Features
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for longer operating life.
Its multi-position mounting flexibility permits installation in virtually any position.
Housings are straddle-milled, top and bottom, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for optimum durability, as well as greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures capacity for high torque and overhung loads.
Pipe plugs allow easy fill up, level, and drain in virtually any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal lifestyle.
Both 2D and 3D CAD drawings can be found in our eCatalog.
TheIncreased Quality! Industrial Ranked! Inexpensive!One-piece gearcase, without exterior ribs, is made from close-grained cast iron and provides for rigid equipment and bearing support. It also offers excellent warmth dissipation.Double lip, spring-loaded seals protect from oil leakage and stop dirt from entering.Stepped shafts with oversized ball andtapered roller bearings.Carbon metal shafts for greater power.High tensile strength cast bronze worm wheel and hardened and ground alloy steel worm made intregal with the shaft for long and trouble-free life.Oil sight gauge for simple maintenance (unavailable upon sizes 25 and 34).Factory oil filled.Every device test run just before shipment.Universal installation with bolt-on feet.Highly modifiable design.All of this at substantially cheaper prices than you have already been accustomed to paying for reducers of lesser quality. Less

If this short article really did not satisfy your interest worrying worm gear speed reducer, examine these additional ones out.