ep

January 4, 2021

one.A connecting hyperlink of an O-ring Chain for common application is pre-coated with grease in the pins. Just before connection, verify the grease around the surfaces of pins, and in the event the level of grease is compact, apply grease with bare hands. (If gloves are employed, the grease will likely be absorbed from the gloves.)
Instance: Once the connecting hyperlink (I) of an O-ring chain for standard application is
shipped, O-rings are fitted in the roots of your pins. Should the O-rings come loose on account of vibration in the course of transport, refit the O-rings in on the roots on the pins.
In this case, be sure you return the grease collected with the roots on the pins for the central surfaces from the pins, much more at portion A than at portions B proven during the above illustration. (Portions A is worn on account of sliding with the bushings.)
two.The chain may be most simply linked about the teeth of a sprocket. Engage the hyperlinks at the two ends with the chain with the sprocket teeth and match connecting pins. If the sprocket can be moved, the chain can also be connected about the loosened side.
three. Connecting procedure
1.Confirm that O-rings are connected towards the roots of your pins.
2.If your volume of grease applied within the connecting pins is little, coat the pins with grease with the central portions.
three.Insert the connecting pins to the bushings with the inner back links at each ends.
4.Verify that the grease is utilized towards the complete encounter with the O-ring, and match the O-ring onto the connecting pins.
5.Insert the connecting pins to the connecting plate and whilst pressing the connecting plate, set up the spring clip. Verify no matter if the head (the end with no split) with the spring clip is turned during the feeding direction of your chain. (See the next illustration.)
six.Make sure to verify that the spring clip is securely fitted while in the clip grooves with the connecting pins.
This completes jointing in the connecting website link. Note that grease about the surfaces of connecting pins and O-rings might be removed all through set up get the job done. In this case, re-grease applying the grease within the surface of your base chain or the grease inside the polyethylene bag by which the connecting hyperlink was contained.