China Standard Right Angle Aluminium Alloy Nmrv Series Worm Gearbox with SGS Certificate best automatic gearbox

Product Description

 

Product Parameters

Editing and broadcasting of main materials

1. Body, die-casting aluminum alloy;

2. Worm shaft, 20 Crq steel, high temperature treatment;

3. Worm gear, nickel bronze alloy;

4. Aluminum alloy body, sandblasting and surface anti-corrosion treatment;

5. Cast iron body, painted with bIu RA5571.

Regular center distance specification editing and broadcasting

Center distance: 130 (unit: mm).

Output hole/shaft diameter: 11, 14, 18, 25, 28, 35, 42, 45 (unit: mm)

Detailed Photos

 

NMRV-063-30-VS–AS-80B5-0.75KW-B3

NMRV

Means hole-input with flange

NRV

Means shaft-input without flange

063

Centre-to-centre spacing of worm-gear speed reducer

30

ratio

VS

Double input shaft

F1(FA)

Flange putput shaft

AS

Single output shaft

AB

Double output shaft

PAM

 

80B5

Motor mounting facility

0.75KW

 

B3

Mounting position

N2

NRV571

NRV030

NRV040

NRV050

NRV063

NRV075

NRV090

NRV110

NRV130

400

390

530

1571

1400

1830

2160

2390

3571

3950

250

460

620

1200

1650

2150

2520

2800

3530

4610

150

550

740

1420

1960

2450

2990

3310

4180

5470

100

630

850

1620

2250

2910

3430

3800

4790

6260

60

740

1000

1920

2660

3450

4060

4500

5680

7420

40

850

1150

2200

3050

3950

4650

5150

6500

8500

25

990

1350

2570

3570

4620

5440

6571

7600

9940

10

1350

1830

3490

4840

6270

7380

8180

10320

13500

 

 

 

 

 

 

 

 

 

 

A

50

65

84

101

120

131

162

191

203

B

38

50

64

76

95

101

122

151

163

Use and safety guarantee

1. Please check and confirm the matching intensity between worm gear reducer and mechanical equipment before use to assure that it is in the safety range of worm gear reducer performance parameters
2. Worm gear reducer has filled with WA460 lubricating oil. Please replace the lubricating oil after the first starting of 400 hours and after then 4000 hours for lubricating oil replacing cycle
3. There should be enough lubrication in worm gear box and keep regular check with the oil level.
4. When installation. please be careful to avoid sharp instruments bruising the oil seals on output shaft to cause leakage
5. Please confirm the rotation direction before mechanical connection. If the rotation direction is not correct, it will possible injury or damage the devices
6. Please set safety covers in rotating position to avoid of injuring
7. Please pay full attention: it is very dangerous if there is off or falling when movin

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Hardness: Hardened Tooth Surface
Installation: 90 Degree
Layout: Expansion
Gear Shape: Bevel Gear
Step: Single-Step
Type: Gear Reducer
Samples:
US$ 30/Piece
1 Piece(Min.Order)

|
Request Sample

nmrv gearbox

Replacing Parts vs. Replacing the Whole NMRV Gearbox

Whether to replace parts or the entire NMRV gearbox depends on the extent of the issue and the availability of replacement parts:

Replacing Parts: If a specific component is faulty or worn, you can often replace that part. This is a cost-effective solution and is feasible when the damage is isolated to a single component.

When to Replace Parts:

  • Minor wear on gears, bearings, or seals.
  • Specific components are damaged, but the rest of the gearbox is in good condition.

Replacing the Whole Gearbox: If multiple components are severely damaged, the gearbox housing is cracked, or the gearbox repeatedly experiences issues, replacing the entire unit might be a better option.

When to Replace the Whole Gearbox:

  • Severe damage to multiple components.
  • Cracks or damage to the gearbox housing.
  • Frequent breakdowns and repairs.

Professional Assessment: In some cases, it’s best to consult a professional technician to assess the situation and provide recommendations. They can guide you on whether to replace parts or the entire unit based on the specific circumstances.

Ultimately, the decision between replacing parts and replacing the whole NMRV gearbox depends on factors such as the extent of damage, cost considerations, and the expertise of professionals.

nmrv gearbox

Lubrication for an NMRV Gearbox

Lubrication is essential for the proper functioning and longevity of an NMRV gearbox. The type and amount of lubricant required may vary depending on the gearbox model and manufacturer. Here are the general lubrication practices:

  • Recommended Lubricants: Use the lubricants specified by the gearbox manufacturer. Typically, high-quality gear oils with the appropriate viscosity and additives are recommended.
  • Initial Fill: Prior to the gearbox’s first operation, ensure that it is properly filled with the recommended lubricant to the correct level. Follow the manufacturer’s guidelines for the proper quantity.
  • Lubricant Change: Regularly change the lubricant according to the manufacturer’s recommended intervals. Over time, lubricants can degrade due to heat and contamination, which can affect gearbox performance.
  • Temperature Considerations: Gearboxes operating in extreme temperatures may require lubricants with specific temperature ranges to ensure proper viscosity and protection.
  • Checking Levels: Periodically check the lubricant level in the gearbox to ensure it is within the specified range. This can prevent damage caused by insufficient lubrication.
  • Oil Analysis: Some gearbox systems benefit from regular oil analysis to monitor lubricant condition and identify potential issues before they cause significant damage.

Proper lubrication practices contribute to reduced friction, wear, and heat generation within the NMRV gearbox, leading to improved efficiency and extended lifespan.

nmrv gearbox

Using an NMRV Gearbox

An NMRV gearbox, also known as a worm gear reducer, is commonly used for various applications that require speed reduction, torque multiplication, and smooth power transmission. This type of gearbox offers several benefits:

  • Compact Design: NMRV gearboxes have a compact and space-saving design, making them suitable for applications with limited installation space.
  • High Gear Ratio: Worm gear reducers can achieve high gear ratios in a single stage, making them ideal for applications where a significant reduction in speed is needed.
  • Quiet Operation: The meshing of the worm gear and worm wheel results in low noise levels during operation.
  • Simple Operation: NMRV gearboxes have a simple design with fewer components, leading to ease of operation and maintenance.
  • Reliable and Durable: Worm gear reducers are known for their reliability and durability, making them suitable for continuous and heavy-duty applications.

Common applications of NMRV gearboxes include:

  • Conveyor systems
  • Material handling equipment
  • Industrial machinery
  • Automated systems
  • Food processing equipment
  • Packaging machinery

Due to their versatility and ability to provide precise speed reduction, NMRV gearboxes are widely used in various industries to optimize the performance of different types of machinery and equipment.

China Standard Right Angle Aluminium Alloy Nmrv Series Worm Gearbox with SGS Certificate   best automatic gearbox	China Standard Right Angle Aluminium Alloy Nmrv Series Worm Gearbox with SGS Certificate   best automatic gearbox
editor by CX 2024-03-28

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *