China wholesaler Motovario-Like Double Shaft Mechanical Nmrv Worm Gearbox car gearbox

Product Description

SMRV series worm-gear speed reducer is a new-generation of products developed by our company with combination of advanced by technology both at home and abroad.

Characteristics:
(1)Large output torque
(2) Safe, reliable, economical and durable
(3) Stable transmission, quiet operation
(4) High heat-radiating efficiency, high carrying ability
(5) Combination of 2 single-step worm gear speed reducers, meeting the requirements of super speed ratio
(6) Mechanical gearboxes are widely used in the sectors,like foodstuff, ceramics, and chemical manufacturing, as well as packing, printing, dyeing and plastics
 Technical data:
(1) Motor input power:0.06kw-15kw
(2)  Output torque:4-2320N.M
(3)  Speed ratio of worm gear peed reducer: 5/10/15/20/25/30/40/50/60/80/100
(4)  With IEC motor input flange: 56B14/71B14/80B5/90B5
 Materials:
(1)   NMRV571-NMRV090: Aluminium alloy housing
(2)   NMRV110-150: Cast iron housing
(3)   Bearing: CHINAMFG bearing & Homemade bearing
(4)   Lubricant: Synthetic & Mineral
(5)  The material of the worm mandrel is HT250, and the worm ring gear is ZQSn10-1.
(6)  With high quality homemade bearings, assembled CHINAMFG oil seals & filled with high quality lubricant.
Operation&mantenance
(1)When worm speed reducer starts to work up to200-400 hours, its lubricant should be replaced.
(2)The gearbox need to replace the oil after 4000 hours.
(3)Worm reduction gearbox is fully filled with lubricant oil after finshed assembly.
(4)Lubricanting oil should be kept enough in the casing and checked at a fixed time.
 Color:
(1)   Blue / Light blue
(2)   Silvery White
 Quality control
(1)  Quality guarantee: 1 year
(2)  Certificate of quality: ISO9001:2000
(3)   Every product must be tested before sending

Motor power  Model speed ratio output speed output toruqe
0.06kw 1400rpm NMRV030 5 280rpm  2.0N.M
NMRV030 7.5 186rpm  2.6N.M
NMRV030 10 140rpm  3.3N.M
NMRV030 15 94rpm  4.7N.M
NMRV030 20 70rpm  5.9N.M
NMRV030 25 56rpm  6.8N.M
NMRV030 30 47rpm  7.9N.M
NMRV030 40 35rpm  9.7N.M
NMRV030 50 28rpm 11.0N.M
NMRV030 60 24rpm 12.0N.M
NMRV030 80 18rpm 14.0N.M
0.09kw 1400rpm NMRV030 5 280rpm  2.7N.M
NMRV030 7.5 186rpm  3.9N.M
NMRV030 10 140rpm  5.0N.M
NMRV030 15 94rpm  7.0N.M
NMRV030 20 70rpm  8.8N.M
NMRV030 25 56rpm 10.0N.M
NMRV030 30 47rpm 12.0N.M
NMRV030 40 35rpm 14.0N.M
NMRV030 50 28rpm 17.0N.M
NMRV030 60 24rpm 18.0N.M
0.12kw 1400rpm NMRV030 5 280rpm  3.6N.M
NMRV030 7.5 186rpm  5.2N.M
NMRV030 10 140rpm  6.6N.M
NMRV030 15 94rpm  9.3N.M
NMRV030 20 70rpm 12.0N.M
NMRV030 25 56rpm 14.0N.M
NMRV030 30 47rpm 16.0N.M
NMRV030 40 35rpm 19.0N.M
NMRV030 50 28rpm 22.0N.M
0.18kw 1400rpm NMRV030 5 280rpm  5.3N.M
NMRV030 7.5 186rpm  7.7N.M
NMRV030 10 140rpm 10.0N.M
NMRV030 15 94rpm 14.0N.M
NMRV030 20 70rpm 18.0N.M
NMRV030 25 56rpm 20.0N.M
NMRV030 30 47rpm 24.0N.M

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Industry
Function: Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Single-Step
Customization:
Available

|

Customized Request

nmrv gearbox

Safety Precautions When Working with NMRV Gearboxes

Working with NMRV (worm gear) gearboxes requires careful attention to safety to prevent accidents and injuries. Here are some essential safety precautions to consider:

  • Personal Protective Equipment (PPE): Always wear appropriate PPE, such as gloves, safety glasses, and protective clothing, to protect yourself from potential hazards.
  • Lockout-Tagout: Before performing any maintenance or repairs, ensure the equipment is properly shut down and locked out to prevent accidental startup.
  • Training: Only qualified personnel with proper training and experience should work on NMRV gearboxes to minimize the risk of errors and accidents.
  • Proper Tools: Use the correct tools for the job and ensure they are in good condition. Incorrect tools can cause damage or pose safety risks.
  • Adequate Lighting: Work in well-lit areas to enhance visibility and reduce the risk of accidents caused by poor lighting.
  • Secure Work Area: Ensure the work area is clean, organized, and free from clutter to prevent tripping hazards and improve overall safety.
  • Lubrication: When applying lubricants, be cautious to avoid spills. Clean up any spills immediately to prevent slips and falls.
  • Follow Manufacturer Guidelines: Adhere to the manufacturer’s instructions, maintenance schedules, and safety guidelines when working on NMRV gearboxes.
  • Electrical Safety: If the gearbox is electrically powered, ensure proper electrical safety protocols are followed during maintenance or repairs.
  • Avoid Overloading: Do not exceed the recommended load capacities of the gearbox to prevent mechanical failures and potential hazards.
  • Stay Clear of Moving Parts: Keep hands, clothing, and other objects away from moving parts to prevent entanglement or injury.
  • Emergency Procedures: Be familiar with emergency shutdown procedures and know how to respond in case of an unexpected situation.

By following these safety precautions, you can help ensure a safe working environment and minimize the risk of accidents or injuries when working with NMRV gearboxes.

nmrv gearbox

Common Problems Associated with NMRV Gearboxes

NMRV (worm gear) gearboxes are reliable and durable, but like any mechanical system, they can experience certain issues over time. Here are some common problems that can be associated with NMRV gearboxes:

  • Overheating: Inadequate lubrication or excessive load can lead to overheating, causing accelerated wear and potential damage to the gearbox components.
  • Noise and Vibration: Unusual noises or excessive vibration during operation could indicate misalignment, worn gears, or damaged bearings.
  • Leakage: Oil leaks can occur due to worn seals or damaged gaskets, leading to lubricant loss and potential contamination of the surrounding environment.
  • Worn Gears: Over time, gear teeth can wear down due to friction and load. This can result in reduced efficiency, increased backlash, and compromised performance.
  • Misalignment: Improper installation or mounting can lead to misalignment between the input and output shafts, causing increased friction, wear, and reduced efficiency.
  • Backlash: Excessive backlash between the worm gear and the mating gear can lead to poor positioning accuracy and reduced efficiency in motion control applications.
  • Poor Lubrication: Using incorrect or inadequate lubricants, or neglecting proper lubrication maintenance, can lead to increased friction, wear, and potential failure of gearbox components.
  • Seal Damage: Worn or damaged seals can result in oil leaks and contamination, affecting the performance and lifespan of the gearbox.
  • Shaft Wear: Over time, the input and output shafts can experience wear due to load and friction, affecting the overall operation of the gearbox.
  • Corrosion: Exposure to harsh environments or corrosive substances can lead to corrosion of gearbox components, reducing their lifespan.

To prevent and address these common problems, it’s crucial to follow proper maintenance and servicing practices, use high-quality lubricants, address issues promptly, and consult professionals when needed. Regular inspections and proactive maintenance can help extend the operational lifespan and reliability of NMRV gearboxes.

nmrv gearbox

Installing an NMRV Gearbox

Installing an NMRV gearbox requires careful attention to ensure proper alignment and secure attachment. Here’s a general guide to the installation process:

  1. Prepare the Workspace: Ensure you have a clean and organized workspace with the necessary tools and equipment.
  2. Positioning: Place the NMRV gearbox in the desired position on your machinery, making sure it aligns with the input and output components.
  3. Alignment: Ensure that the input shaft of the gearbox is aligned with the driving shaft from the power source. Misalignment can lead to premature wear and reduced efficiency.
  4. Mounting: Securely mount the NMRV gearbox to the machinery frame using appropriate fasteners. Follow the manufacturer’s recommendations for torque specifications.
  5. Input Coupling: Connect the input shaft of the gearbox to the driving shaft using a suitable coupling. This coupling should be properly aligned to avoid unnecessary stress on the gearbox components.
  6. Output Coupling: Similarly, connect the output shaft of the gearbox to the driven component using an appropriate coupling.
  7. Lubrication: Before operation, make sure to fill the gearbox with the recommended lubricant to ensure proper gear meshing and reduce friction.
  8. Testing: Run the machinery briefly to check for any unusual noises, vibrations, or leaks. Make any necessary adjustments.

It’s crucial to follow the manufacturer’s installation guidelines and specifications to ensure a smooth and trouble-free installation process. Proper installation contributes to the longevity and reliable performance of your NMRV gearbox.

China wholesaler Motovario-Like Double Shaft Mechanical Nmrv Worm Gearbox   car gearbox	China wholesaler Motovario-Like Double Shaft Mechanical Nmrv Worm Gearbox   car gearbox
editor by CX 2024-04-09

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *