Descripción
EPPC080/NMRV050 Helical-Worm Combined Reducer
The EPPC080/NMRV050 combines a larger 80 mm helical pre-stage with a 50 mm NMRV worm main stage, delivering 100 Nm rated output torque at an elevated 1.5 kW input-power capacity. This frame is specified for high-utilisation continuous-duty conveyor drives at food processors, bottling-line accumulators running 24/7 campaigns, and cycle-intensive packaging equipment where the larger pre-stage provides improved thermal headroom over the compact PC063 equivalent. Combined mechanical efficiency of approximately 80 percent reduces in-cabinet heat load on enclosed conveyor drives.
EPPC080/NMRV050 Specifications
Full technical data for the EPPC080/NMRV050 helical-worm combined reducer. Values are verified at end-of-line dynamometer test and retained on serial-number record for five years. Non-standard shaft modifications, food-grade lubricant fills, and mounting-position variations are available on request through our engineering desk.
| Especificación | Valor |
|---|---|
| Designación del modelo | EPPC080/NMRV050 |
| Configuración | Reductor combinado de gusano helicoidal (etapa previa helicoidal + etapa principal de gusano NMRV) |
| Tipo de etapa previa | PC080 helical gear pre-stage (approximately 96 percent efficient) |
| Tipo de escenario principal | Etapa principal del reductor de tornillo sin fin NMRV050 |
| Distancia al centro | 80 + 50 mm |
| par de salida nominal | 100 Nm |
| Rango de relación combinada | 10:1 a 700:1 |
| Eficiencia mecánica combinada | approximately 80 percent |
| Velocidad del eje de salida (entrada de 4 polos a 1400 rpm) | 2.0 – 140 rpm |
| Potencia de entrada de la etapa previa (máx.) | 1.5 kW |
| Orificio de salida (eje hueco) | 25 mm |
| Diámetro del eje de salida (eje macizo) | 25 mm |
| Capacidad de carga radial de salida | 2800 N |
| Brida del motor – NEMA | 140TC |
| Brida del motor – IEC | B5 / B14 |
| Material de vivienda | Aleación de aluminio fundido a presión ADC12 (ambas etapas) |
| Material para engranajes helicoidales | Acero aleado cementado 20CrMnTi, rectificado |
| Material del eje del tornillo sin fin | Acero aleado cementado 20CrMnTi, rectificado ISO grado 6 |
| Material de la rueda helicoidal | Fundición centrífuga de bronce de estaño CuSn12 |
| Lubricante | PAG sintético ISO VG 320 (llenado en fábrica, cámara compartida) |
| sellos de eje | Juntas de doble labio de Viton (FKM) |
| Protección contra la entrada de polvo y agua | IP55 (actualización para laberinto disponible) |
| Posiciones de montaje | B3, B6, B7, B8, V5, V6 |
| Peso ensamblado | 14.2 kg |
Engineering Features of the EPPC080/NMRV050
Six core design characteristics that distinguish the helical-worm combined EPPC080/NMRV050 from alternative two-stage worm reducer constructions. Each feature below is grounded in an operational constraint that Australian OEM specifiers raise during technical qualification.
Carcasa de aluminio ADC12
Tanto la carcasa de la etapa previa como la de la etapa principal utilizan aleación de aluminio fundido a presión ADC12 para una óptima conductividad térmica y resistencia a la corrosión. El peso total de la unidad es típicamente entre un 30 y un 40 por ciento menor que el de un tornillo sin fin helicoidal de hierro fundido equivalente con el mismo rango de torsión, lo que simplifica su manipulación durante la modernización y la instalación.
Lubricación sintética PAG
El sistema de transmisión combinado se llena de fábrica con poliglicol de alquileno sintético ISO VG 320. La etapa previa helicoidal y la etapa principal de tornillo sin fin comparten una cámara de aceite común en la configuración combinada. El volumen de aceite calibrado de fábrica mantiene la orientación de montaje declarada sin necesidad de ajustes en campo.
Viton Double-Lip Shaft Seals
Viton (FKM) double-lip seals at both the pre-stage input shaft and the main-stage output shaft. Continuous service rating to 200 degC handles Australian summer ambient inside enclosed packaging cabinets without hardening or premature cracking, common failure modes for nitrile seal alternatives.
IP55 Ingress Protection
Both stages carry IP55 ingress-protection rating as standard. Labyrinth-seal output-shaft upgrade is available for dust-intensive service in mining and grain-handling applications. Marine-grade paint is specified as standard on units destined for coastal bulk-terminal installations.
IEC and NEMA Motor Flanges
The helical pre-stage motor interface accepts IEC B5 or B14 flange-mount motors as well as NEMA 56C, 140TC, 180TC, and 210TC flange-mount motors depending on the pre-stage frame size. Dual-standard compatibility simplifies motor sourcing across Australian and international customer bases.
Six Mounting Orientations
Factory-supported mounting positions B3, B6, B7, B8, V5 and V6. Declared mounting orientation at order stage sets the factory oil-fill volume calibration. Vertical mounts receive additional oil volume to ensure both the helical pre-stage and worm main-stage engagement surfaces remain properly submerged.
Typical EPPC080/NMRV050 Applications Across Australia
The EPPC080/NMRV050 is specified across five primary Australian industry sectors. The descriptions below reflect real installations where the helical pre-stage efficiency advantage over a two-stage worm configuration provides measurable operating-cost benefit or thermal-envelope relief.
Procesamiento de alimentos y bebidas
In food and beverage processing applications, the EPPC080/NMRV050 powers bottling-line spindle drives, palletiser-cell indexing reducers and CIP-tolerant processing conveyors at Australian dairies, craft breweries and meat processors. The higher combined efficiency of the helical pre-stage compared to a two-stage worm configuration matters here because these lines run continuously for long campaigns. Food-grade H1 synthetic lubricant fill is available as a factory option, with stainless fasteners and washdown-tolerant paint on request.
Tratamiento ambiental y de aguas
For environmental and water-treatment service, the EPPC080/NMRV050 drives screw-conveyor sludge transport, slow-speed grit-classifier augers and DAF skimmer reducers at municipal and private industrial plants across regional Australia. The IP55 housing and viton lip-seal package handle the corrosive splash environment of chlorination and caustic-dosing zones. The helical pre-stage maintains efficient torque transmission across a wide input-rpm range, enabling VFD-driven variable-speed duty with stable output torque across the operating envelope.
Agricultura y producción primaria
For agricultural and primary-production applications, the EPPC080/NMRV050 is deployed on poultry-house feed-conveyor drives, grain-handling screw-conveyor reducers and irrigation-pump clutch drives on NSW, Victorian and Queensland rural operations. The helical pre-stage efficiency advantage over two-stage worm construction becomes significant where the reducer operates continuously for long periods – electrical consumption on a dairy-shed 24-hour feed line adds up, and the thermal envelope of the aluminium housing handles Queensland summer ambient without active cooling.
Minería y procesamiento de minerales
In mining and minerals-processing service, the EPPC080/NMRV050 drives ore-sample screw feeders, slow-speed cone-crusher auxiliary reducers and tailings-pond skimmer drives at Pilbara, Kalgoorlie and central Queensland operations. The helical pre-stage provides improved impact-load tolerance compared to worm-only pre-stages – relevant on screen-drive and feeder applications where intermittent shock loading is normal. Labyrinth-seal output upgrade and marine-grade paint are both specified as standard on units destined for tropical-coastal bulk-terminal installations.
Manipulación de materiales y logística
For material handling and logistics duty, the EPPC080/NMRV050 is specified into continuous-duty roller-conveyor drives, pallet-transfer indexing units and bulk-terminal belt-tensioning reducers at Australian DC operations. The helical pre-stage delivers approximately 80 percent combined mechanical efficiency, substantially higher than the 50 to 70 percent typical of two-stage worm arrangements. At continuous operation this translates to meaningful electrical-energy savings and reduced heat load inside enclosed conveyor cabinets – particularly relevant on 24/7 three-shift Sydney and Melbourne distribution centres.
How to Specify the EPPC080/NMRV050 Correctly
Se especifica un reductor combinado de tornillo sin fin helicoidal cuando la potencia de entrada, el funcionamiento continuo o el comportamiento térmico del gabinete hacen que la ventaja de eficiencia sobre un equivalente de tornillo sin fin de dos etapas sea operativamente significativa. Tres comprobaciones son importantes: el par de salida requerido, la relación combinada requerida y la potencia de entrada continua real del motor en el punto de funcionamiento. Nuestro departamento de ingeniería verifica las tres con respecto al perfil de funcionamiento del cliente antes de emitir una recomendación de dimensionamiento.
1. Confirmar el par de salida
Required torque at the output must fall within the 100 Nm rating of the EPPC080/NMRV050. Apply an appropriate service factor (1.0 uniform / 1.25 moderate shock / 1.5 heavy shock) on the nominal load torque.
2. Establecer la razón combinada
La velocidad de salida requerida en la carga accionada determina la relación combinada. Las relaciones combinadas disponibles abarcan desde 10:1 hasta 700:1 mediante diferentes combinaciones de relación entre la etapa previa y la etapa principal. Especifique la velocidad de salida objetivo para lograr la relación adecuada.
3. Confirmar la potencia del motor
Pre-stage input-power capacity is 1.5 kW maximum. Helical pre-stage efficiency (approximately 96 percent) allows smaller motor sizing than a two-stage worm equivalent for the same driven-load torque.
EPPC080/NMRV050 Technical Questions
The most common technical questions our engineering desk receives on the EPPC080/NMRV050 from Australian OEM design engineers, plant maintenance leads, and specification consultants. Additional questions are welcome by email to our engineering team.
Can I use VFD speed control with the EPPC080/NMRV050?
Yes. The helical pre-stage handles variable-frequency-drive input rpm across the normal VFD operating range (typically 5 to 60 Hz, equating to 150 to 1,800 rpm input). Output torque remains consistent across this range. At very low input rpm (below 5 Hz) lubrication-film wedge at the worm engagement can degrade – consult our engineering desk for extended-low-speed duty-cycle requirements.
What mounting orientations does the EPPC080/NMRV050 support?
Six standard mounting positions: B3 (horizontal, input side up), B6 (horizontal, input side down), B7, B8, V5 (vertical, output down) and V6 (vertical, output up). The factory oil-fill volume is calibrated to the declared mounting orientation – specify the mounting position at quotation stage to ensure correct lubricant quantity on the delivered unit.
Is the EPPC080/NMRV050 compatible with competitor two-stage reducers dimensionally?
The main-stage output-flange pattern follows standard NMRV dimensions, making direct bolt-on retrofit possible for equivalent-frame European and Asian catalogue units from the major brands. Overall envelope dimensions differ slightly with the pre-stage frame size. For retrofit compatibility verification, send the existing-unit dimensional drawings to our engineering desk for a direct envelope comparison.
What certifications does the EPPC080/NMRV050 carry?
Our quality management system is ISO 9001:2015 certified. The EPPC080/NMRV050 carries CE conformity for export markets, RoHS material compliance, and IP55 ingress-protection testing. Certificates of conformity are issued with every shipment and individual-serial-number test records are retained at the factory for five years. Application-specific certifications such as ATEX are available on a project-configured basis.
¿Existen modificaciones personalizadas para el eje?
En la etapa principal de salida, se ofrecen longitudes de eje personalizadas, chaveteros no estándar, ejes de salida de doble extensión para configuraciones de doble accionamiento y tapas protectoras para los extremos del eje. Se aplican requisitos de cantidad mínima para las variantes de eje que no figuran en el catálogo. Las especificaciones detalladas se intercambian con nuestro departamento de ingeniería durante la fase de cotización.
¿Pueden suministrar variantes aptas para uso alimentario o resistentes al lavado?
Se ofrecen, bajo pedido, lubricante sintético con clasificación USDA H1, mejora de los sujetadores de acero inoxidable y sistemas de pintura resistentes al lavado para exposición diaria a productos cáusticos CIP. Especifique sus requisitos al solicitar un presupuesto para que la fábrica pueda configurar el lubricante adecuado, la compatibilidad con el elastómeros de sellado y el acabado superficial tanto para la preetapa helicoidal como para la carcasa de la etapa principal NMRV.
What Engineers Say About the EPPC080/NMRV050
Opiniones verificadas de clientes de ingeniería australianos e internacionales. Los nombres y las empresas se publican con autorización. El texto de las reseñas se parafrasea cuando es necesario para proteger la confidencialidad de los detalles del proyecto.
The EPPC080/NMRV050 on slow-speed feeder auxiliary drives at our site. Red-dust environment, variable ambient temperature, continuous-duty operation. We specified the labyrinth-seal output upgrade and marine-grade paint. The helical pre-stage handles intermittent ore-fall impact loading better than the worm-only units we previously specified. Performance through the full wet-season cycle has been solid.
Integrated the EPPC080/NMRV050 into circulation-drive units for our fish-farm agitator product line. Corrosion resistance of the aluminium-housed construction handles the marine salt-air environment well. Helical pre-stage impact-load tolerance matters on circulation-drive start-up where water inertia loads the system momentarily.
Evaluated the EPPC080/NMRV050 for introduction to our distribution catalogue after customer-requested sourcing options. Build inspection at sample-receipt aligned with the datasheet specification, and mechanical-envelope compatibility with European-standard incumbent suppliers was verified. Customer-market response to the helical-worm combined has been positive.
The EPPC080/NMRV050 is being qualified for our heavy-industry conveyor-drive product platform. The input-power capacity at the helical pre-stage and the self-locking output characteristic from the worm main stage together address specifications our customers bring to the machine design stage. Technical exchange with the engineering desk on custom shaft-modification requirements has been productive.
The EPPC080/NMRV050 powers slow-conveyor drives at a regional food-processing client site. Tropical-ambient operation and continuous-duty utilisation stress the reducer envelope, and the helical-worm combined design has handled both well through the first 16 months of service. Corrosion resistance of the aluminium housing in humid ambient has been solid.
Configuraciones combinadas de gusano helicoidal relacionadas
Three related helical-worm combined reducers across different torque and input-power envelopes. If the EPPC080/NMRV050 is close but not exactly matched to your duty requirement, one of the alternatives below may deliver a better specification fit.
Explorar el catálogo completo gama combinada de gusano helicoidal o comparar con el Alternativas combinadas de lombrices de dos etapas.
Ready to Specify the EPPC080/NMRV050?
Envíe los parámetros de su ciclo de trabajo a nuestro departamento de ingeniería en Australia para obtener una recomendación sobre el tamaño adecuado, opciones de motores compatibles y un presupuesto definitivo. Las consultas técnicas las gestiona el ingeniero responsable del producto, no un departamento de ventas genérico.
