China G3 Series Three Phase Motor Reducer Helical Gearbox worm gear reducer buy

Merchandise Description

 

Item Description

Primary Attributes:
one) Created of large top quality material,  non-rustingBoth flange and foot mounting available and ideal for all-round installation
two) Large output torque and substantial radiating effectiveness
three)Exact grinding helical equipment with Clean managing and reduced noise, no deformation,can perform extended time in dreadful condition
four)Nice physical appearance, tough service life and modest quantity, compact framework
five)Equally 2 and 3 phase accessible with broad ratio assortment from 5 to 200
6)Distinct output shaft diameter accessible -40-50mm
seven)Modular building enlarge ratio from 5 to 1400

Major Materials:
one)housing with aluminium alloyand cast iron content
two)Output Shaft Materials:20CrMnTi
3)Excellent quality no noise bearings to preserve lengthy support existence
4)Large functionality oil seal to prevent from oil leakage

Programs:
G3 Sequence helical equipment motor are wide utilized for all sorts of automated gear, this sort of as chip removal machine, conveyor, packaging products, woodworking machinery, farming products, slurry scraper ,dryer, mixer and so on.

Comprehensive Photos

Product Parameters

 

(n1=1400r/min  50hz)
norminal ratio			five	ten	fifteen	twenty	25	thirty	40	50	sixty	80	100	one hundred	120	160	200
0.1kw	output shaft		Ø18								Ø22
	n2* (r/min)		282	138	92	70	56	forty six	35	28	23	18	fourteen	–	11	9	7
	M2(Nm)	50hz	3.2	6.five	nine.8	twelve.9	16.one	19.6	25.7	31.1	37.five	49.five	sixty two.9	–	seventy six.1	100.7	125.4
		60hz	3	five	8	11	thirteen	17	21	26	31	41	52	–	sixty three	eighty four	one hundred and five
	Fr1(N)		588	882	980	1180	1270	1370	1470	1570	2160	2450	2450	2450	2450	2450	2450
	Fr2(N)		176
norminal ratio			5	10	fifteen	20	twenty five	thirty	40	50	60	eighty	100	one hundred	a hundred and twenty	160	two hundred
0.2kw	output shaft		Ø18					Ø22						Ø28
	n2* (r/min)		282	138	ninety two	70	fifty six	forty five	35	29	23	eighteen	fourteen	thirteen	12	eight	seven
	M2(Nm)	50hz	6.5	12.six	19.1	26.3	32.6	38.9	50.4	sixty three	75.6	one hundred.eight	103.nine	a hundred twenty five.4	a hundred and fifty	200.four	250.seven
		60hz	five.four	10.5	sixteen.six	21.9	27.one	32.four	42	52.five	sixty three	84	86.six	104.5	a hundred twenty five	167	208.nine
	Fr1(N)		588	882	980	1180	1270	1760	1860	1960	2160	2450	2450	2840	3330	3430	3430
	Fr2(N)		196
norminal ratio			five	ten	15	20	twenty five	30	40	fifty	sixty	eighty	a hundred	a hundred	120	one hundred sixty	two hundred
0.4kw	output shaft		Ø22					Ø28						Ø32
	n2* (r/min)		288	one hundred forty four	ninety two	72	fifty eight	forty seven	36	29	24	18	fourteen	14	twelve	9	7
	M2(Nm)	50hz	twelve.nine	25	38.6	fifty one.4	sixty five.four	78.2	one hundred.seven	125.4	150	two hundred.four	206.eight	250.7	301.1	four hundred.seven	461.8
		60hz	10.seven	twenty.eight	32.1	42.nine	fifty four.5	65.two	eighty three.9	104.five	125	167	172.3	208.nine	250.nine	333.nine	384.8
	Fr1(N)		882	1180	1370	1470	1670	2550	2840	3140	3430	3430	3430	4900	5880	5880	5880
	Fr2(N)		245
norminal ratio			5	ten	fifteen	20	twenty five	thirty	40	50	sixty	eighty	a hundred	a hundred	120	one hundred sixty	two hundred
0.75kw	output shaft		Ø28					Ø32						Ø40
	n2* (r/min)		278	a hundred and forty	ninety four	69	fifty eight	forty six	35	29	24	18	14	fourteen	eleven	nine	seven
	M2(Nm)	50hz	24.six	48.2	72.nine	ninety seven.five	122.1	145.7	187.5	235.7	282.nine	376.one	387.9	439	527	703	764
		60hz	20.5	forty.two	sixty.seven	eighty one.three	201.eight	121.4	156.3	196.4	235.7	313.four	323.two	366	439	585	732
	Fr1(N)		1270	1760	2160	2350	2450	4571	4210	4610	5490	5880	5880	7060	7060	7060	7060
	Fr2(N)		294
norminal ratio			five	10	fifteen	20	twenty five	30	forty	fifty	sixty	80	a hundred	a hundred	a hundred and twenty	a hundred and sixty	two hundred
1.5kw	output shaft		Ø32					Ø40						Ø50
	n2* (r/min)		280	one hundred forty	93	70	55	forty seven	34	27	24	17	fourteen	thirteen	twelve	8	seven
	M2(Nm)	50hz	48.two	97.5	a hundred forty five.7	193.nine	242.1	272	351	439	527	703	724	878	1060	1230	1230
		60hz	forty.two	eighty one.3	121.four	161.six	201.eight	226	293	366	439	585	603	732	878	1170	1230
	Fr1(N)		1760	2450	2840	3230	3820	5100	5880	7060	7060	7060	7060	9800	9800	9800	9800
	Fr2(N)		343
norminal ratio			5	ten	15	twenty	twenty five	thirty	40	50	60	80	a hundred
2.2kw	output shaft		Ø40					Ø50
	n2* (r/min)		272	136	ninety five	sixty eight	fifty four	45	36	28	24	18	14
	M2(Nm)	50hz	67	133	200	266	332	399	515	644	773	1571	1230
		60hz	56	111	167	221	277	332	429	537	644	858	1080
	Fr1(N)		2160	3140	3530	4571	4700	6960	7250	8620	9800	9800	9800
	Fr2(N)		392

Define and mounting dimension:

G3FM: A few Period Gear MOTOR WITH FLANGE                                                                                       (n1=1400r/min)
Power kw	output shaft	ratio	A		F	I	J	M	HAI	O1	P	Q	R	S	T	U	W	X	Y	Y1
			normal	brake
0.1kw	Ø18	five–30-forty-fifty	236	270	192.5	11	16.5	one hundred seventy	4	ten	thirty	a hundred forty five	35	18	twenty.5	129	six	157	eighty	eighty one
	Ø22	-one hundred sixty-200	262	296	197.five	eleven	19	185	four	12	forty	148	47	22	24.5	129	6	171.five	89.five	eighty three.five
0.2kw	Ø18	5-	267	270	192.five	eleven	sixteen.5	170	4	ten	thirty	one hundred forty five	35	18	twenty.five	129	six	161	80	eighty one
	Ø22	-80-one hundred	293	296	197.five	11	19	185	4	twelve	forty	148	47	22	24.5	129	six	171.five	89.5	eighty three.five
	Ø28		306	309.five	208.five	eleven	23.5	215	four	fifteen	45	a hundred and seventy	50	28	31	129	8	198.five	one zero five.5	88
0.4kw	Ø22	five-	314	324.five	204	eleven	19	185	four	twelve	forty	148	forty seven	22	24.five	139	six	171.five	89.5	88.five
	Ø28	-80-100	330	337.five	215	11	23.5	215	four	15	45	a hundred and seventy	fifty	28	31	139	8	198.5	a hundred and five.five	93
	Ø32		349	357	229.five	thirteen	28.five	250	four	fifteen	fifty five	a hundred and eighty	60	32	35	139	10	234	126	98
0.75kw	Ø28	five-	350.five	343.5	227.five	eleven	23.five	215	4	15	45	a hundred and seventy	fifty	28	31	159	eight	198.5	one hundred and five.5	103
	Ø32	-eighty-a hundred	379.five	387	242	13	28.five	250	four	15	55	180	sixty	32	35	159	ten	234	126	108
	Ø40		401.5	408.5	270	18	34	310	five	eighteen	65	230	seventy one	forty	43	185	12	284	149	126.five
1.5kw	Ø32	five-	420.5	441	254	13	28.five	250	5	fifteen	55	180	sixty	32	35	185	ten	234	126	121
	Ø40	-eighty-a hundred	457.five	478	270	18	34	310	5	18	sixty five	230	seventy one	forty	forty three	185	twelve	284	149	126.5
	Ø50		485.five	506	300	22	40	360	five	25	seventy five	270	83	50	53.five	185	fourteen	325	173.five	132.five
2.2kw	Ø40	five-	466.5	487	270	18	34	310	five	18	sixty five	230	seventy one	40	43	185	twelve	284	149	126.five
	Ø50	-80-one hundred	510.five	531	300	22	forty	360	5	twenty five	seventy five	270	83	50	fifty three.5	185	14	325	173.five	132.5

 

G3LM: A few Stage Gear MOTOR WITH FOOT                                                                                                               (n1=1400r/min)
Power kw	output shaft	ratio	A		D	E	F	J	G	H	K	P	S	T	U	V	W	X	Y	Y1
			common	brake
0.1kw	Ø18	5–thirty-40-50	236	270	forty	110	a hundred thirty five	16.five	65	nine	45	30	18	twenty.5	129	183	six	133	85	ten
	Ø22	-one hundred sixty-two hundred	262	296	65	one hundred thirty	one hundred fifty five	19	ninety	11	fifty five	40	22	24.5	129	193	six	139.5	ninety	twelve
0.2kw	Ø18	5-	267	270	forty	110	135	16.five	65	9	forty five	thirty	eighteen	20.five	129	183	6	133	85	ten
	Ø22	-eighty-one hundred	293	296	65	one hundred thirty	155	19	ninety	11	55	forty	22	24.five	129	193	six	139.5	90	twelve
	Ø28		306	309.5	90	140	a hundred seventy five	23.5	a hundred twenty five	11	sixty five	forty five	28	31	129	203	eight	170	one hundred ten	fifteen
0.4kw	Ø22	five-	314	324.five	sixty five	130	a hundred and fifty five	19	ninety	eleven	55	40	22	24.five	139	199.5	six	141.5	90	twelve
	Ø28	-eighty-100	330	337.five	90	a hundred and forty	a hundred seventy five	23.five	125	eleven	65	forty five	28	31	139	210	8	170	a hundred and ten	fifteen
	Ø32		349	357	130	170	208	28.5	a hundred and seventy	thirteen	70	55	32	35	139	226	10	198	130	18
0.75kw	Ø28	5-	350.five	343.5	ninety	140	a hundred seventy five	23.5	125	eleven	sixty five	45	28	31	159	222	8	one hundred seventy	110	15
	Ø32	-80-one hundred	379.5	387	one hundred thirty	a hundred and seventy	208	28.five	170	thirteen	70	fifty five	32	35	159	238.5	10	198	a hundred thirty	eighteen
	Ø40		401.5	408.five	one hundred fifty	210	254	34	196	fifteen	90	sixty five	forty	forty three	185	249	twelve	230	a hundred and fifty	20
1.5kw	Ø32	five-	420.five	441	one hundred thirty	170	208	28.five	170	13	70	fifty five	32	35	185	250.five	ten	198	a hundred thirty	eighteen
	Ø40	-eighty-100	457.5	478	one hundred fifty	210	254	34	196	15	90	sixty five	40	forty three	185	260	12	230	one hundred fifty	twenty
	Ø50		485.five	506	a hundred and sixty	230	290	40	210	18	100	seventy five	fifty	53.five	185	288	14	265	a hundred and seventy	25
2.2kw	Ø40	five-	466.five	487	150	210	254	34	196	fifteen	90	65	40	43	185	260	12	230	one hundred fifty	20
	Ø50	-eighty-a hundred	510.5	531	160	230	290	forty	210	18	100	seventy five	50	fifty three.five	185	288	fourteen	265	one hundred seventy	25

 

G3FS: IEC Equipment REDUCER WITH FOOT                                                                                                                           (n1=1400r/min)
Power kw	output shaft	ratio	A	B	C	F	I	J	L	M	N	HAI	O1	P	Q	R	S	S1	T	T1	W	W1	X	Y	Y1
0.12kw	Ø18	5–thirty-40-fifty	147	ninety five	115	154	11	16.five	four.5	170	140	4	ten	thirty	a hundred forty five	35	18	11	20.five	12.eight	six	four	163	80	86.five
	Ø22	-a hundred and sixty-200	173	ninety five	115	164	11	19	4.5	185	one hundred forty	four	twelve	forty	148	47	22	11	24.5	twelve.8	six	4	171.five	89.5	89
0.18kw	Ø18	5-	147	ninety five	one hundred fifteen	154	eleven	sixteen.5	four.five	one hundred seventy	a hundred and forty	4	10	30	145	35	18	eleven	20.five	12.eight	6	four	163	80	86.5
	Ø22	-eighty-100	173	ninety five	one hundred fifteen	164	11	19	four.5	185	a hundred and forty	4	12	40	148	forty seven	22	11	24.five	12.eight	six	four	171.five	89.5	89
	Ø28		186.5	95	one hundred fifteen	186	11	23.5	4.5	215	one hundred forty	4	15	45	a hundred and seventy	50	28	eleven	31	twelve.8	8	4	198.five	a hundred and five.5	ninety three.five
0.37kw	Ø22	5-	181.5	110	a hundred thirty	164	eleven	19	4.5	185	one hundred sixty	four	twelve	forty	148	forty seven	22	14	24.5	16.3	6	5	201	89.5	99
	Ø28	-80-a hundred	198	one hundred ten	130	186	eleven	23.5	four.5	215	160	four	15	forty five	a hundred and seventy	50	28	fourteen	31	sixteen.three	eight	five	198.5	a hundred and five.five	103.five
	Ø32		216.5	one hundred ten	a hundred thirty	215	thirteen	28.five	four.5	250	one hundred sixty	4	fifteen	55	a hundred and eighty	sixty	32	fourteen	35	16.3	ten	five	234	126	108.5
0.75kw	Ø28	5-	206.5	one hundred thirty	one hundred sixty five	185	eleven	23.5	four.5	215	200	four	15	forty five	a hundred and seventy	50	28	19	31	21.8	8	six	216.five	a hundred and five.five	123.five
	Ø32	-eighty-100	235	130	one hundred sixty five	215	13	28.five	4.5	250	200	four	fifteen	55	one hundred eighty	60	32	19	35	21.8	10	six	236.five	126	128.five
	Ø40		260.5	a hundred thirty	165	270	eighteen	34	four.5	310	200	five	eighteen	sixty five	230	71	40	19	43	21.8	12	eight	284	149	134
1.5kw	Ø32	5-	252	one hundred thirty	165	215	thirteen	28.5	four.five	250	200	5	15	fifty five	180	60	32	24	35	27.three	10	8	236.5	126	128.5
	Ø40	-80-a hundred	293.five	a hundred thirty	one hundred sixty five	270	eighteen	34	4.five	310	200	5	eighteen	sixty five	230	71	40	24	forty three	27.three	twelve	eight	284	149	134
	Ø50		321.five	one hundred thirty	165	three hundred	22	forty	four.five	360	two hundred	5	twenty five	75	270	83	fifty	24	53.five	27.3	fourteen	eight	323.five	173.five	140
2.2kw	Ø40	5-	290	a hundred and eighty	215	270	eighteen	34	five.5	310	250	five	18	65	230	seventy one	40	28	forty three	31.3	twelve	8	284	149	134
	Ø50	-80-a hundred	334	one hundred eighty	215	three hundred	22	forty	five.five	360	250	five	25	75	270	83	50	28	53.5	31.three	fourteen	eight	323.five	173.five	140

 

G3LS: IEC Equipment REDUCER WITH FOOT                                                                                                                           (n1=1400r/min)
Power kw	output shaft	ratio	A	B	C	D	E	F	G	H	J	K	L	N	P	S	S1	T	T1	W	W1	X	Y	Y1	Z
0.12kw	Ø18	5–thirty-40-50	147	95	one hundred fifteen	40	one hundred ten	a hundred thirty five	sixty five	nine	16.5	45	four.five	a hundred and forty	thirty	18	eleven	twenty.five	12.8	six	4	138.5	85	10	M8
	Ø22	-a hundred and sixty-two hundred	173	ninety five	a hundred and fifteen	65	one hundred thirty	154	ninety	eleven	19	55	4.five	a hundred and forty	40	22	11	24.5	12.8	six	four	141	90	12	M8
0.18kw	Ø18	5-	147	95	one hundred fifteen	40	110	a hundred thirty five	65	nine	sixteen.five	45	four.5	one hundred forty	30	eighteen	eleven	twenty.5	12.eight	6	4	138.5	85	ten	M8
	Ø22	-eighty-one hundred	173	95	a hundred and fifteen	sixty five	a hundred thirty	154	90	eleven	19	fifty five	4.five	a hundred and forty	forty	22	11	24.five	12.8	six	4	141	90	twelve	M8
	Ø28		186.five	ninety five	a hundred and fifteen	90	a hundred and forty	175	a hundred twenty five	eleven	23.5	sixty five	four.five	one hundred forty	45	28	11	31	twelve.eight	eight	4	a hundred and seventy	110	fifteen	M8
0.37kw	Ø22	5-	181.5	110	a hundred thirty	65	one hundred thirty	154	ninety	11	19	55	4.five	a hundred and sixty	40	22	fourteen	24.5	sixteen.three	6	5	151	ninety	twelve	M8
	Ø28	-eighty-a hundred	198	110	one hundred thirty	ninety	one hundred forty	one hundred seventy five	one hundred twenty five	11	23.five	sixty five	four.5	a hundred and sixty	45	28	14	31	sixteen.3	8	five	one hundred seventy	110	15	M8
	Ø32		216.five	one hundred ten	130	one hundred thirty	one hundred seventy	208	a hundred and seventy	thirteen	28.five	70	4.5	one hundred sixty	fifty five	32	fourteen	35	16.3	ten	5	198	130	18	M8
0.75kw	Ø28	five-	206.5	one hundred thirty	a hundred sixty five	ninety	140	one hundred seventy five	a hundred twenty five	eleven	23.five	sixty five	4.5	200	forty five	28	19	31	21.8	eight	six	186.5	110	15	M10
	Ø32	-80-a hundred	235	a hundred thirty	one hundred sixty five	a hundred thirty	170	208	one hundred seventy	13	28.5	70	4.five	200	fifty five	32	19	35	21.8	10	6	201.five	130	eighteen	M10
	Ø40		260.5	a hundred thirty	165	one hundred fifty	210	254	196	fifteen	34	90	four.five	200	sixty five	forty	19	43	21.8	12	eight	230	one hundred fifty	20	M10
1.5kw	Ø32	five-	252	a hundred thirty	a hundred sixty five	a hundred thirty	170	208	one hundred seventy	thirteen	28.5	70	four.five	200	55	32	24	35	27.3	ten	8	201.5	one hundred thirty	eighteen	M10
	Ø40	-eighty-a hundred	293.five	130	a hundred sixty five	a hundred and fifty	210	254	196	fifteen	34	ninety	four.5	two hundred	sixty five	forty	24	forty three	27.3	twelve	eight	230	one hundred fifty	20	M10
	Ø50		321.5	130	one hundred sixty five	a hundred and sixty	230	290	210	eighteen	40	100	four.five	200	75	fifty	24	fifty three.5	27.three	14	eight	265	a hundred and seventy	25	M10
2.2kw	Ø40	five-	290	one hundred eighty	215	one hundred fifty	210	254	196	fifteen	34	ninety	5.five	250	65	forty	28	43	31.three	twelve	8	230	150	twenty	M12
	Ø50	-80-100	334	a hundred and eighty	215	160	230	290	210	eighteen	40	one hundred	five.five	250	seventy five	fifty	28	fifty three.5	31.3	14	eight	265	one hundred seventy	25	M12

Business Profile

We are a professional reducer producer found in HangZhou, ZHangZhoug province.Our major goods is  full variety of RV571-one hundred fifty worm reducers , also provided GKM hypoid helical gearbox, GRC inline helical gearbox, Personal computer models, UDL Variators and AC Motors, G3 helical equipment motor.Items are broadly utilised for apps this sort of as: foodstuffs, ceramics, packing, chemical compounds, pharmacy, plastics, paper-producing, development equipment, metallurgic mine, environmental security engineering, and all kinds of automatic lines, and assembly lines.With quick delivery, superior after-product sales services, sophisticated making facility, our merchandise offer well  both at residence and overseas. We have exported our reducers to Southeast Asia, Jap Europe and the Center East and so on.Our intention is to produce and innovate on the basis of high high quality, and create a good reputation for reducers.

Workshop:

 

Exhibition

ZheJiang PTC Truthful:

Packaging & Delivery

Following Product sales Services

one.Routine maintenance Time and Guarantee:Inside 1 yr soon after getting products.
two.Other Services: Such as modeling selection information, set up information, and problem resolution manual, etc

FAQ

one.Q:Can you make as for every customer drawing?
A: Indeed, we offer you personalized provider for clients accordingly. We can use customer’s nameplate for gearboxes.
two.Q:What is your conditions of payment ?
A: thirty% deposit just before production,equilibrium T/T prior to shipping.
three.Q:Are you a trading company or producer?
A:We are a manufacurer with innovative gear and knowledgeable employees.
four.Q:What is actually your manufacturing potential?
A:4000-5000 PCS/Thirty day period
5.Q:Free of charge sample is accessible or not?
A:Yes, we can source free sample if customer agree to shell out for the courier cost
6.Q:Do you have any certificate?
A:Sure, we have CE certificate and SGS certification report.

Contact data:
Ms Lingel Pan
For any questions just feel free ton speak to me. A lot of thanks for your kind consideration to our organization!

US $35-145 / Piece |

1 Piece (Min. Order)

###

Application:	Motor, Machinery, Marine, Agricultural Machinery, Power Transmission Applications
Function:	Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction
Layout:	Coaxial
Hardness:	Hardened Tooth Surface
Installation:	Vertical or Horizontal Type
Step:	Two Stage- Three Stage

###

Samples:	US$ 35/Piece 1 Piece(Min.Order) | Request Sample

###

Customization:	Available | Customized Request

###

<td style="width%3

(n1=1400r/min  50hz)
norminal ratio			5	10	15	20	25	30	40	50	60	80	100	100	120	160	200
0.1kw	output shaft		Ø18								Ø22
	n2* (r/min)		282	138	92	70	56	46	35	28	23	18	14	–	11	9	7
	M2(Nm)	50hz	3.2	6.5	9.8	12.9	16.1	19.6	25.7	31.1	37.5	49.5	62.9	–	76.1	100.7	125.4
		60hz	3	5	8	11	13	17	21	26	31	41	52	–	63	84	105
	Fr1(N)		588	882	980	1180	1270	1370	1470	1570	2160	2450	2450	2450	2450	2450	2450
	Fr2(N)		176
norminal ratio			5	10	15	20	25	30	40	50	60	80	100	100	120	160	200
0.2kw	output shaft		Ø18					Ø22						Ø28
	n2* (r/min)		282	138	92	70	56	45	35	29	23	18	14	13	12	8	7
	M2(Nm)	50hz	6.5	12.6	19.1	26.3	32.6	38.9	50.4	63	75.6	100.8	103.9	125.4	150	200.4	250.7
		60hz	5.4	10.5	16.6	21.9	27.1	32.4	42	52.5	63	84	86.6	104.5	125	167	208.9
	Fr1(N)		588	882	980	1180	1270	1760	1860	1960	2160	2450	2450	2840	3330	3430	3430
	Fr2(N)		196
norminal ratio			5	10	15	20	25	30	40	50	60	80	100	100	120	160	200
0.4kw	output shaft		Ø22					Ø28						Ø32
	n2* (r/min)		288	144	92	72	58	47	36	29	24	18	14	14	12	9	7
	M2(Nm)	50hz	12.9	25	38.6	51.4	65.4	78.2	100.7	125.4	150	200.4	206.8	250.7	301.1	400.7	461.8
		60hz	10.7	20.8	32.1	42.9	54.5	65.2	83.9	104.5	125	167	172.3	208.9	250.9	333.9	384.8
	Fr1(N)		882	1180	1370	1470	1670	2550	2840	3140	3430	3430	3430	4900	5880	5880	5880
	Fr2(N)		245
norminal ratio			5	10	15	20	25	30	40	50	60	80	100	100	120	160	200
0.75kw	output shaft		Ø28					Ø32						Ø40
	n2* (r/min)		278	140	94	69	58	46	35	29	24	18	14	14	11	9	7
	M2(Nm)	50hz	24.6	48.2	72.9	97.5	122.1	145.7	187.5	235.7	282.9	376.1	387.9	439	527	703	764
		60hz	20.5	40.2	60.7	81.3	201.8	121.4	156.3	196.4	235.7	313.4	323.2	366	439	585	732
	Fr1(N)		1270	1760	2160	2350	2450	4020	4210	4610	5490	5880	5880	7060	7060	7060	7060
	Fr2(N)		294
norminal ratio			5	10	15	20	25	30	40	50	60	80	100	100	120	160	200
1.5kw	output shaft		Ø32					Ø40						Ø50
	n2* (r/min)		280	140	93	70	55	47	34	27	24	17	14	13	12	8	7
	M2(Nm)	50hz	48.2	97.5	145.7	193.9	242.1	272	351	439	527	703	724	878	1060	1230	1230
		60hz	40.2	81.3	121.4	161.6	201.8	226	293	366	439	585	603	732	878	1170	1230
	Fr1(N)		1760	2450	2840	3230	3820	5100	5880	7060	7060	7060	7060	9800	9800	9800	9800
	Fr2(N)		343
norminal ratio			5	10	15	20	25	30	40	50	60	80	100
2.2kw	output shaft		Ø40					Ø50
	n2* (r/min)		272	136	95	68	54	45	36	28	24	18	14
	M2(Nm)	50hz	67	133	200	266	332	399	515	644	773	1029	1230
		60hz	56	111	167	221	277	332	429