Penerangan Produk
Foto Terperinci
Penerangan Produk
Komponen:
1. Perumah: Kotak Gear Aloi Aluminium Tuang (RV571~RV090) Kotak Gear Besi Tuang (RV110~RV150)
2. Roda Cacing: Aloi Gangsa Timah Boleh Pakai, Aloi Gangsa Aluminium
3. Aci Cacing: Keluli 20Cr, pengkarbonan, pelindapkejutan, pengisaran, kekerasan permukaan 56-62HRC, baki pengkarbonan 0.3-0.5mm
lapisan selepas pengisaran yang tepat
4. Konfigurasi Input:
Dilengkapi dengan Motor Elektrik (Motor AC, Motor Brek, Motor DC, Motor Servo)
Flange Motor yang dinormalkan IEC
Input Aci Pepejal
Input Sambungan Ekor Aci Cacing
5. Konfigurasi Output:
Output Aci Berongga Berkunci
Aci Berongga dengan Flange Output
Output Aci CHINAMFG Pasang Masuk
Model:
Input Aci Berongga dengan Flange Motor yang dinormalkan IEC
RV571~RV150
Input Aci Pepejal
RV571~RV150
Parameter Produk
Data Teknikal
| Model | Rated Power | Dinilai | Input Hole | Input Shaft | Output Hole | Output Shaft |
| RV571 | 0.06KW~0.12KW | 5~60 | Φ9 | Φ9 | Φ11 | Φ11 |
| RV030 | 0.06KW~0.25KW | 5~80 | Φ9(Φ11) | Φ9 | Φ14 | Φ14 |
| RV040 | 0.09KW~0.55KW | 5~100 | Φ9(Φ11,Φ14) | Φ11 | Φ18(Φ19) | Φ18 |
| RV050 | 0.12KW~1.5KW | 5~100 | Φ11(Φ14,Φ19) | Φ14 | Φ25(Φ24) | Φ25 |
| RV063 | 0.18KW~2.2KW | 7.5~100 | Φ14(Φ19,Φ24) | Φ19 | Φ25(Φ28) | Φ25 |
| RV075 | 0.25KW~4.0KW | 7.5~100 | Φ14(Φ19,Φ24,Φ28) | Φ24 | Φ28(Φ35) | Φ28 |
| RV090 | 0.37KW~4.0KW | 7.5~100 | Φ19(Φ24,Φ28) | Φ24 | Φ35(Φ38) | Φ35 |
| RV110 | 0.55KW~7.5KW | 7.5~100 | Φ19(Φ24,Φ28,Φ38) | Φ28 | Φ42 | Φ42 |
| RV130 | 0.75KW~7.5KW | 7.5~100 | Φ24(Φ28,Φ38) | Φ30 | Φ45 | Φ45 |
| RV150 | 2.2KW~15KW | 7.5~100 | Φ28(Φ38,Φ42) | Φ35 | Φ50 | Φ50 |
Nisbah: 5, 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100
Pemasangan:
Flange Dipasang
Kaki Dipasang
Lengan Tork Dipasang
Pelinciran:
Pelinciran Gris
Pelinciran Mandian Minyak dan Percikan
Penyejukan:
Penyejukan Semula Jadi
Pensijilan
Profil Syarikat
Xihu (West Lake) Dis.ng Transmission Equipment Co., Ltd. located HangZhou city, ZHangZhoug, as 1 professional manufacturer
dan pengeksport pengurang roda pin sikloidal, pengurang cacing, pengurang gear, kotak gear, motor AC dan alat ganti relatif
bahagian, memiliki pengalaman yang kaya dalam barisan ini selama bertahun-tahun.
Kami adalah 1 kilang langsung, dengan peralatan pengeluaran canggih, pasukan pembangunan yang kuat dan menghasilkan
keupayaan untuk menawarkan produk berkualiti kepada pelanggan.
Produk kami digunakan secara meluas untuk pelbagai industri Metalurgi, Bahan Kimia, pengangkatan, perlombongan, Petroleum, tekstil, perubatan, kayu dan sebagainya. Pasaran utama: China, Afrika, Australia, Vietnam, Turki,
Japan, Korea, Philippines…
Selamat datang untuk bertanya kepada kami sebarang soalan, tawaran yang baik sentiasa untuk anda untuk perniagaan jangka panjang.
Soalan Lazim
S: Adakah anda syarikat perdagangan atau pengilang?
A: Kami kilang.
S: Berapa lamakah masa penghantaran anda?
A: Secara amnya ia adalah 5-10 hari jika barang ada dalam stok atau 15-20 hari jika barang tiada dalam stok.
S: Bolehkah kita beli 1 keping setiap item untuk ujian kualiti?
A: Ya, kami gembira menerima pesanan percubaan untuk ujian kualiti.
QBagaimana untuk memilih kotak gear yang memenuhi keperluan anda?
A:Anda boleh merujuk katalog kami untuk memilih kotak gear atau kami boleh membantu memilih bila anda menyediakannya
maklumat teknikal tork output yang diperlukan, kelajuan output dan parameter motor dll.
S: Apakah maklumat yang perlu kami berikan sebelum membuat pesanan pembelian?
A:a) Jenis kotak gear, nisbah, jenis input dan output, bebibir input, kedudukan pemasangan dan maklumat motor dll.
b) Warna perumahan.
c) Kuantiti pembelian.
d) Keperluan khas lain.
/* 10 Mac 2571 17:59:20 */!fungsi(){fungsi s(e,r){var a,o={};cuba{e&&e.split(“,).untukSetiap(fungsi(e,t){e&&(a=e.padanan(/(.*?):(.*)$/))&&1
| Permohonan: | Motor, Jentera, Marin, Jentera Pertanian |
|---|---|
| Kekerasan: | Permukaan Gigi yang Mengeras |
| Pemasangan: | Jenis Menegak |
| Susun atur: | Koaksial |
| Bentuk Gear: | Peralatan Cacing |
| Langkah: | Langkah Tunggal |
Calculating Torque Requirements for an NMRV Gearbox
Calculating torque requirements for an NMRV gearbox involves several steps: Identify Input Torque, Calculate Output Torque, Consider Efficiency, and Add Safety Margin.
- Identify Input Torque: Determine the input torque required by the application, taking into account factors such as load, speed, and efficiency.
- Calculate Output Torque: Use the gear ratio of the NMRV gearbox to calculate the output torque needed to achieve the desired output speed.
- Consider Efficiency: Take into account the efficiency of the NMRV gearbox. The actual output torque will be influenced by the gearbox’s mechanical efficiency.
- Add Safety Margin: To ensure reliable performance and account for variations in operating conditions, it’s recommended to add a safety margin to the calculated torque requirements.
Formula to calculate output torque: Output Torque = Input Torque × Gear Ratio × Gearbox Efficiency
Keep in mind that torque requirements can vary based on the specific application and factors such as load type, duty cycle, and environmental conditions. Consulting with gearbox manufacturers or engineering experts can help ensure accurate torque calculations for your NMRV gearbox application.
Jangka hayat Kotak Gear NMRV
Jangka hayat kotak gear NMRV (gear cacing) boleh berbeza-beza berdasarkan beberapa faktor, termasuk kualiti pembuatan, amalan penyelenggaraan yang betul, keadaan operasi dan aplikasi khusus ia digunakan. Walau bagaimanapun, apabila direka bentuk, dikeluarkan dan diselenggara dengan betul, kotak gear NMRV boleh mempunyai hayat perkhidmatan yang panjang dan boleh dipercayai.
High-quality NMRV gearboxes that are made from durable materials, precisely machined, and assembled with care tend to have a longer lifespan. Regular maintenance, including proper lubrication, inspection, and addressing any signs of wear or damage, can significantly extend the gearbox’s operational life.
Keadaan operasi di mana kotak gear digunakan juga memainkan peranan dalam menentukan jangka hayatnya. Faktor seperti beban, suhu, kelajuan dan persekitaran boleh memberi kesan kepada haus dan lusuh pada komponen kotak gear.
It’s important to follow the manufacturer’s recommendations for maintenance intervals and procedures to ensure optimal performance and longevity of the NMRV gearbox. By adhering to these guidelines and addressing any issues promptly, users can expect an NMRV gearbox to provide reliable service for many years.
Key Features of an NMRV Gearbox
NMRV gearboxes, also known as worm gear reducers, offer several key features that make them suitable for various applications:
- Reka Bentuk Kompak: NMRV gearboxes are known for their compact and space-saving design, making them ideal for installations with limited space.
- Kecekapan Tinggi: These gearboxes offer relatively high efficiency levels, which ensures efficient power transmission and reduced energy loss.
- Speed Reduction: NMRV gearboxes are primarily used for speed reduction applications, where the input speed is reduced while torque is increased.
- Torque Multiplication: The worm and worm wheel mechanism allows for torque multiplication, making NMRV gearboxes suitable for applications requiring high torque output.
- Self-Locking: The helical design of the worm causes self-locking, preventing the output shaft from back-driving the input shaft and providing mechanical locking.
- Operasi Lancar: NMRV gearboxes offer smooth and quiet operation, making them suitable for applications where noise reduction is important.
- Wide Range of Ratios: These gearboxes come in a wide range of gear ratios, allowing users to select the appropriate ratio for their specific application.
- Penyelenggaraan Rendah: The simple design and few moving parts contribute to the low maintenance requirements of NMRV gearboxes.
- Kebolehgunaan: NMRV gearboxes are versatile and can be used in various industries and applications, including conveyor systems, food processing, packaging, and more.
It’s important to consider these key features when selecting an NMRV gearbox for your specific application to ensure optimal performance and efficiency.
editor by CX 2023-12-26