Produktbeskrivelse
Produktbeskrivelse
Hovedmaterialer:
1) Hus: aluminiumslegering ADC12 (størrelse 571-090); støpejern HT200 (størrelse 110-150);
2)Worm:20Cr, ZI Involute profile; carbonize&quencher heat treatment make gear surface hardness up to 56-62 HRC; After precision grinding, carburization layer’s thickness between 0.3-0.5mm.
3) Snekkehjul: slitesterk stannumlegering CuSn10-1
Detaljerte bilder
Kombinasjonsalternativer:
Inngang: med inngangsaksel, med firkantet flens, med IEC-standard inngangsflens
Utgang: med momentarm, utgangsflens, enkel utgangsaksel, dobbel utgangsaksel, plastdeksel
Snekkereduksjonsgir er tilgjengelige med forskjellige kombinasjoner: NMRV+NMRV, NMRV+NRV, NMRV+PC, NMRV+UDL, NMRV+MOTORER
Eksplodert visning:
Produktparametere
| Gammel modell | Ny modell | Forhold | Senteravstand | Makt | Inngangsdiameter | Utgangsdiameter | Utgangsmoment | Vekt |
| RV571 | 7.5~100 | 25 mm | 0,06 kW ~ 0,12 kW | Φ9 | Φ11 | 21 Nm | 0,7 kg | |
| RV030 | RW030 | 7.5~100 | 30 mm | 0,06 kW ~ 0,25 kW | Φ9 (Φ11) | Φ14 | 45 Nm | 1,2 kg |
| RV040 | RW040 | 7.5~100 | 40 mm | 0,09 kW ~ 0,55 kW | Φ9(Φ11,Φ14) | Φ18 (Φ19) | 84 Nm | 2,3 kg |
| RV050 | RW050 | 7.5~100 | 50 mm | 0,12 kW ~ 1,5 kW | Φ11 (Φ14, Φ19) | Φ25 (Φ24) | 160 Nm | 3,5 kg |
| RV063 | RW063 | 7.5~100 | 63 mm | 0,18 kW ~ 2,2 kW | Φ14 (Φ19, Φ24) | Φ25 (Φ28) | 230 Nm | 6,2 kg |
| RV075 | RW075 | 7.5~100 | 75 mm | 0,25 kW ~ 4,0 kW | Φ14 (Φ19, Φ24, Φ28) | Φ28 (Φ35) | 410 Nm | 9,0 kg |
| RV090 | RW090 | 7.5~100 | 90 mm | 0,37 kW ~ 4,0 kW | Φ19 (Φ24, Φ28) | Φ35 (Φ38) | 725 Nm | 13,0 kg |
| RV110 | RW110 | 7.5~100 | 110 mm | 0,55 kW ~ 7,5 kW | Φ19 (Φ24, Φ28, Φ38) | Φ42 | 1050 Nm | 35,0 kg |
| RV130 | RW130 | 7.5~100 | 130 mm | 0,75 kW ~ 7,5 kW | Φ24(Φ28, Φ38) | Φ45 | 1550 Nm | 48,0 kg |
| RV150 | RW150 | 7.5~100 | 150 mm | 2,2 kW ~ 15 kW | Φ28 (Φ38, Φ42) | Φ50 | 84,0 kg |
GMRV-konturdimensjon:
| GMRV | EN | B | C | C1 | D(H8) | E(h8) | F | G | G1 | H | H1 | jeg | M | N | Å | P | Q | R | S | T | BL | β | b | t | V |
| 030 | 80 | 97 | 54 | 44 | 14 | 55 | 32 | 56 | 63 | 65 | 29 | 55 | 40 | 57 | 30 | 75 | 44 | 6.5 | 21 | 5.5 | M6*10(n=4) | 0° | 5 | 16.3 | 27 |
| 040 | 100 | 121.5 | 70 | 60 | 18(19) | 60 | 43 | 71 | 78 | 75 | 36.5 | 70 | 50 | 71.5 | 40 | 87 | 55 | 6.5 | 26 | 6.5 | M6*10(n=4) | 45° | 6 | 20.8(21.8) | 35 |
| 050 | 120 | 144 | 80 | 70 | 25(24) | 70 | 49 | 85 | 92 | 85 | 43.5 | 80 | 60 | 84 | 50 | 100 | 64 | 8.5 | 30 | 7 | M8*12(n=4) | 45° | 8 | 28.3(27.3) | 40 |
| 063 | 144 | 174 | 100 | 85 | 25(28) | 80 | 67 | 103 | 112 | 95 | 53 | 95 | 72 | 102 | 63 | 110 | 80 | 8.5 | 36 | 8 | M8*12(n=8) | 45° | 8 | 28.3(31.3) | 50 |
| 075 | 172 | 205 | 120 | 90 | 28(35) | 95 | 72 | 112 | 120 | 115 | 57 | 112.5 | 86 | 119 | 75 | 140 | 93 | 11 | 40 | 10 | M8*14(n=8) | 45° | 8(10) | 31.3(38.3) | 60 |
| 090 | 206 | 238 | 140 | 100 | 35(38) | 110 | 74 | 130 | 140 | 130 | 67 | 129.5 | 103 | 135 | 90 | 160 | 102 | 13 | 45 | 11 | M10*16(n=8) | 45° | 10 | 38.3(41.3) | 70 |
| 110 | 255 | 295 | 170 | 115 | 42 | 130 | – | 144 | 155 | 165 | 74 | 160 | 127.5 | 167.5 | 110 | 200 | 125 | 14 | 50 | 14 | M10*18(n=8) | 45° | 12 | 45.3 | 85 |
| 130 | 293 | 335 | 200 | 120 | 45 | 180 | – | 155 | 170 | 215 | 81 | 179 | 146.5 | 187.5 | 130 | 250 | 140 | 16 | 60 | 15 | M12*20(n=8) | 45° | 14 | 48.8 | 100 |
| 150 | 340 | 400 | 240 | 145 | 50 | 180 | – | 185 | 200 | 215 | 96 | 210 | 170 | 230 | 150 | 250 | 180 | 18 | 72.5 | 18 | M12*22(n=8) | 45° | 14 | 53.8 | 120 |
Firmaprofil
Om CHINAMFG Transmission:
Vi er en profesjonell produsent av reduksjonsventiler i HangZhou, ZHangZhoug-provinsen.
Våre ledende produkter er et komplett utvalg av RV571-150 snekkegir, og vi leverer også GKM hypoid spiralgirkasse, GRC rekkemontert spiralgirkasse, PC-enheter, UDL-variatorer og vekselstrømsmotorer, samt G3 spiralgirmotor.
Produktene er mye brukt i applikasjoner som: matvarer, keramikk, emballasje, kjemikalier, farmasi, plast, papirproduksjon, anleggsmaskiner, metallurgisk gruvedrift, miljøvernteknikk og alle typer automatiske linjer og samlebånd.
Med rask levering, overlegen ettersalgsservice og avansert produksjonsanlegg selger produktene våre godt både hjemme og i utlandet. Vi har eksportert reduksjonsgirene våre til Sørøst-Asia, Øst-Europa og Midtøsten, og så videre. Målet vårt er å utvikle og innovere basert på høy kvalitet, og skape et godt omdømme for reduksjonsgir.
Pakkinginformasjon: Plastposer + kartonger + trekasser, eller på forespørsel
Vi deltar på Tyskland Hannver-utstillingen - ZheJiang PTC-messen - Tyrkia vinner Eurasia
Logistikk
Ettersalgsservice
1. Vedlikeholdstid og garantiInnen 1 år etter mottak av varer.
2. Annen tjeneste: Inkludert veiledning for valg av modellering, installasjonsveiledning og veiledning for problemløsning, etc.
Vanlige spørsmål
1.Q: Kan du lage i henhold til kundens tegning?
A: Yes, we offer customized service for customers accordingly. We can use customer’s nameplate for gearboxes.
2.Q: Hva er betalingsbetingelsene dine?
A: 30% innskudd før produksjon, balanse T/T før levering.
3.Q: Er du et handelsselskap eller en produsent?
A: Vi er en produsent med avansert utstyr og erfarne arbeidere.
4.Q:What’s your production capacity?
A: 8000–9000 STK/MÅNED
5.Q: Er gratis prøve tilgjengelig eller ikke?
A: Ja, vi kan levere gratis prøve hvis kunden godtar å betale for kurerkostnaden
6.Q: Har du noe sertifikat?
A: Ja, vi har CE-sertifikat og SGS-sertifikatrapport.
Kontaktinformasjon:
Fru Lingel Pan
Hvis du har spørsmål, er det bare å kontakte meg. Tusen takk for den gode oppmerksomheten du har gitt oss!
| Søknad: | Motor, Maskiner, Marine, Landbruksmaskiner, Industri |
|---|---|
| Funksjon: | Fordelingskraft, endring av drivmoment, hastighetsendring, hastighetsreduksjon |
| Oppsett: | Rett vinkel |
| Hardhet: | Herdet tannoverflate |
| Installasjon: | Horisontal type |
| Skritt: | Dobbelttrinn |
| Prøver: | US$ 10/Piece 1 stk (min. bestilling) | |
|---|
| Tilpasning: | Tilgjengelig | Tilpasset forespørsel |
|---|
Safety Precautions When Working with NMRV Gearboxes
Working with NMRV (worm gear) gearboxes requires careful attention to safety to prevent accidents and injuries. Here are some essential safety precautions to consider:
- Personal Protective Equipment (PPE): Always wear appropriate PPE, such as gloves, safety glasses, and protective clothing, to protect yourself from potential hazards.
- Lockout-Tagout: Before performing any maintenance or repairs, ensure the equipment is properly shut down and locked out to prevent accidental startup.
- Training: Only qualified personnel with proper training and experience should work on NMRV gearboxes to minimize the risk of errors and accidents.
- Proper Tools: Use the correct tools for the job and ensure they are in good condition. Incorrect tools can cause damage or pose safety risks.
- Adequate Lighting: Work in well-lit areas to enhance visibility and reduce the risk of accidents caused by poor lighting.
- Secure Work Area: Ensure the work area is clean, organized, and free from clutter to prevent tripping hazards and improve overall safety.
- Lubrication: When applying lubricants, be cautious to avoid spills. Clean up any spills immediately to prevent slips and falls.
- Follow Manufacturer Guidelines: Adhere to the manufacturer’s instructions, maintenance schedules, and safety guidelines when working on NMRV gearboxes.
- Electrical Safety: If the gearbox is electrically powered, ensure proper electrical safety protocols are followed during maintenance or repairs.
- Avoid Overloading: Do not exceed the recommended load capacities of the gearbox to prevent mechanical failures and potential hazards.
- Stay Clear of Moving Parts: Keep hands, clothing, and other objects away from moving parts to prevent entanglement or injury.
- Emergency Procedures: Be familiar with emergency shutdown procedures and know how to respond in case of an unexpected situation.
By following these safety precautions, you can help ensure a safe working environment and minimize the risk of accidents or injuries when working with NMRV gearboxes.
Lifespan of an NMRV Gearbox
The lifespan of an NMRV (worm gear) gearbox can vary based on several factors, including the quality of manufacturing, proper maintenance practices, operating conditions, and the specific application it is used for. However, when designed, manufactured, and maintained properly, NMRV gearboxes can have a long and reliable service life.
High-quality NMRV gearboxes that are made from durable materials, precisely machined, and assembled with care tend to have a longer lifespan. Regular maintenance, including proper lubrication, inspection, and addressing any signs of wear or damage, can significantly extend the gearbox’s operational life.
The operating conditions in which the gearbox is used also play a role in determining its lifespan. Factors such as load, temperature, speed, and environment can impact the wear and tear on the gearbox components.
It’s important to follow the manufacturer’s recommendations for maintenance intervals and procedures to ensure optimal performance and longevity of the NMRV gearbox. By adhering to these guidelines and addressing any issues promptly, users can expect an NMRV gearbox to provide reliable service for many years.
Key Features of an NMRV Gearbox
NMRV gearboxes, also known as worm gear reducers, offer several key features that make them suitable for various applications:
- Kompakt design: NMRV gearboxes are known for their compact and space-saving design, making them ideal for installations with limited space.
- High Efficiency: These gearboxes offer relatively high efficiency levels, which ensures efficient power transmission and reduced energy loss.
- Speed Reduction: NMRV gearboxes are primarily used for speed reduction applications, where the input speed is reduced while torque is increased.
- Torque Multiplication: The worm and worm wheel mechanism allows for torque multiplication, making NMRV gearboxes suitable for applications requiring high torque output.
- Self-Locking: The helical design of the worm causes self-locking, preventing the output shaft from back-driving the input shaft and providing mechanical locking.
- Smooth Operation: NMRV gearboxes offer smooth and quiet operation, making them suitable for applications where noise reduction is important.
- Bredt utvalg av forholdstall: These gearboxes come in a wide range of gear ratios, allowing users to select the appropriate ratio for their specific application.
- Low Maintenance: The simple design and few moving parts contribute to the low maintenance requirements of NMRV gearboxes.
- Versatility: NMRV gearboxes are versatile and can be used in various industries and applications, including conveyor systems, food processing, packaging, and more.
It’s important to consider these key features when selecting an NMRV gearbox for your specific application to ensure optimal performance and efficiency.
editor by CX 2023-12-01