Produktbeskrivelse
MB-serien Ulike hastighetsreduksjoner
MB-serien Ulike hastighetsreduksjoner
Utformingen av MB-serien av varierte hastighetsreduksjonsgir kombinerer avansert teknologi både hjemme og i utlandet. Produktene har følgende hovedegenskaper:
1. Høyhastighetspresisjon: 0,5-1 aksel. . Høyhastighetsendringsområde: Hastighetsforholdet varierer fritt fra 1: 1,4 til 1: 7.
2. God tilpasning: MB-seriens forskjellige hastighetsreduksjonsgir kan kombineres med alle typer hastighetsreduksjonsgir for å oppnå lav trinnløs hastighetsendring. Praktisk å regulere hastigheten.
3. Fullstendig forseglet og egnet for ethvert miljø. Laget av høykvalitets aluminiumslegering, støpt i form, pen i utseende, lett i vekt og den ruster aldri.
4. Kontinuerlig i kjøring, front-til-bak i direkte kjøring, jevn kjøring, stabil ytelse og lav støy.
5. Kompakt struktur og lite volum. Høy styrke og lang levetid.
MB-serien av varierte hastighetsreduksjonsventiler er mye brukt i matvarer, pakking, kjemikalier, apotek, plast, papirproduksjon, maskinverktøy, kommunikasjon og andre typer automatiske linjer og samlebånd som trenger hastighetsregulering, og er en god følgesvenn for produksjon.
RV-serien snekkegirkasse
(1) Girkasse av høy kvalitet i aluminiumslegering med støpt trykk
(2) Snekkegir og snekkeaksel med høy nøyaktighet
(3) Jevn girkasse, lavt støynivå, enkelt vedlikehold
(4) Enkel montering og kobling, høy effektivitet
(5) Effekt: 0,09–11 kW
(6) Utgående dreiemoment: 13–1050 N.M
(7) Forhold: 7,5–100
Monteringstype: Fotmontert, Flensmontert
Hovedkarakteristikk for RV-seriens ormgirkasse
RV-serien snekkegirreduksjon er et produkt av ny generasjon utviklet av CHINAMFG basert på perfeksjonering av WJ-seriens produkter med et kompromiss av avansert teknologi både hjemme og i utlandet.
1. Høykvalitets aluminiumslegering, lett i vekt og rustfri.
2. Stort utgående dreiemoment.
3. Jevn drift og lav støy, RV-serien girreduksjon kan fungere lenge under forferdelige forhold.
4. Høy strålingseffektivitet.
5. Pent utseende, slitesterk levetid og lite volum.
6. Egnet for omnibearing-installasjon.
Hovedmaterialer i RV-seriens snekkegirkasse
1. Hus: støpt aluminiumslegering (rammestørrelse: 571 til 090), støpejern (rammestørrelse: 110 til 150).
2. Snekke: 20Crm, varmebehandling av karboniseringsslukkeren gjør overflatehardheten til snekkegir opptil 56-62 HRX, og beholder karboniseringslagets tykkelse mellom 0,3 og 0,5 mm etter presis sliping.
3. Snekkehjul: slitesterk stannumbronselegering.
Overflatemaling av RV-seriens snekkegirkasse
Hus i aluminiumslegering:
1. Kuleblåsing og spesiell antiseptisk behandling på aluminiumslegeringsoverflaten.
2. Etter fosfatering, mal med RAL5571 blå eller sølvhvit maling.
Støpejernshus:
Mal først med rød rustbeskyttelsesmaling, deretter mal med RAL5571 blå eller sølvhvit maling.
| Nominell effekt | 0,09 kW ~ 11 kW |
| Nominelt dreiemoment | 13~1050 Nm |
| Girarrangement | Orm og hjul |
| Forhold | 5, 7.5, 10, , 100 |
| Bolig | Aluminium og støpejern |
| Installasjonsskjema | Flensmontert eller fotmontert eller momentarmmontert |
RV-serien snekkegirkasse modell: RV30 RV40 RV50 RV63 RV75 RV90 RV110 RV130 RV150
Vårt selskap:
AOKMAN ble grunnlagt i 1982, som har mer enn 36 år innen FoU og produksjon av girkasser, tannhjul, aksler, motorer og reservedeler.
Vi kan tilby den rette løsningen for utallige bruksområder. Produktene våre er mye brukt innen metallurgi, stål, gruvedrift, papirmasse og papir, sukker- og alkoholmarkedet og diverse andre typer maskiner, med en sterk tilstedeværelse i det internasjonale markedet.
AOKMAN har blitt en pålitelig leverandør som kan levere girkasser av høy kvalitet. Med 36 års erfaring garanterer vi deg den ytterste pålitelighet og sikkerhet for både produkter og tjenester.
Kundebesøk:
Vanlige spørsmål:
1.Q: Hvilke typer girkasser kan du produsere for oss?
A: Hovedprodukter fra vårt selskap: UDL-serien hastighetsvariator, RV-serien snekkegirreduksjon, ATA-serien akselmontert girkasse, X-, B-serien girreduksjon,
Planetgir i P-serien og reduksjonsgir med spiralformet tann i R-, S-, K- og F-serien, mer
mer enn hundre modeller og tusenvis av spesifikasjoner
2.Q: Kan du lage i henhold til tilpasset tegning?
A: Ja, vi tilbyr tilpasset service for kunder.
3.Q: Hva er betalingsbetingelsene dine?
A: 30% Forskuddsbetaling via T/T etter signering av kontrakten. 70% før levering
4.Q: Hva er din MOQ?
A: 1 sett
Kontakt:
Velkommen til å kontakte meg hvis du er interessert i produktet vårt.
Teamet vårt vil støtte deg i alle dine behov. /* 10. mars 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Søknad: | Motor, Maskiner, Industri |
|---|---|
| Funksjon: | Hastighetsendring, hastighetsreduksjon |
| Oppsett: | Ortogonal |
| Hardhet: | Herdet |
| Installasjon: | Horisontal type |
| Type: | Orm og ormehjul |
| Tilpasning: | Tilgjengelig | Tilpasset forespørsel |
|---|
Safety Precautions When Working with NMRV Gearboxes
Working with NMRV (worm gear) gearboxes requires careful attention to safety to prevent accidents and injuries. Here are some essential safety precautions to consider:
- Personal Protective Equipment (PPE): Always wear appropriate PPE, such as gloves, safety glasses, and protective clothing, to protect yourself from potential hazards.
- Lockout-Tagout: Before performing any maintenance or repairs, ensure the equipment is properly shut down and locked out to prevent accidental startup.
- Training: Only qualified personnel with proper training and experience should work on NMRV gearboxes to minimize the risk of errors and accidents.
- Proper Tools: Use the correct tools for the job and ensure they are in good condition. Incorrect tools can cause damage or pose safety risks.
- Adequate Lighting: Work in well-lit areas to enhance visibility and reduce the risk of accidents caused by poor lighting.
- Secure Work Area: Ensure the work area is clean, organized, and free from clutter to prevent tripping hazards and improve overall safety.
- Lubrication: When applying lubricants, be cautious to avoid spills. Clean up any spills immediately to prevent slips and falls.
- Follow Manufacturer Guidelines: Adhere to the manufacturer’s instructions, maintenance schedules, and safety guidelines when working on NMRV gearboxes.
- Electrical Safety: If the gearbox is electrically powered, ensure proper electrical safety protocols are followed during maintenance or repairs.
- Avoid Overloading: Do not exceed the recommended load capacities of the gearbox to prevent mechanical failures and potential hazards.
- Stay Clear of Moving Parts: Keep hands, clothing, and other objects away from moving parts to prevent entanglement or injury.
- Emergency Procedures: Be familiar with emergency shutdown procedures and know how to respond in case of an unexpected situation.
By following these safety precautions, you can help ensure a safe working environment and minimize the risk of accidents or injuries when working with NMRV gearboxes.
Lubrication for an NMRV Gearbox
Lubrication is essential for the proper functioning and longevity of an NMRV gearbox. The type and amount of lubricant required may vary depending on the gearbox model and manufacturer. Here are the general lubrication practices:
- Recommended Lubricants: Use the lubricants specified by the gearbox manufacturer. Typically, high-quality gear oils with the appropriate viscosity and additives are recommended.
- Initial Fill: Prior to the gearbox’s first operation, ensure that it is properly filled with the recommended lubricant to the correct level. Follow the manufacturer’s guidelines for the proper quantity.
- Lubricant Change: Regularly change the lubricant according to the manufacturer’s recommended intervals. Over time, lubricants can degrade due to heat and contamination, which can affect gearbox performance.
- Temperature Considerations: Gearboxes operating in extreme temperatures may require lubricants with specific temperature ranges to ensure proper viscosity and protection.
- Checking Levels: Periodically check the lubricant level in the gearbox to ensure it is within the specified range. This can prevent damage caused by insufficient lubrication.
- Oil Analysis: Some gearbox systems benefit from regular oil analysis to monitor lubricant condition and identify potential issues before they cause significant damage.
Proper lubrication practices contribute to reduced friction, wear, and heat generation within the NMRV gearbox, leading to improved efficiency and extended lifespan.
Industries Using NMRV Gearboxes
NMRV gearboxes find widespread use in various industries due to their versatility and reliability. Some common industries include:
- Food and Beverage: NMRV gearboxes are used in conveyor systems, mixers, and packaging equipment.
- Material Handling: They are employed in conveyor belts, lifting equipment, and automated material handling systems.
- Automation and Robotics: NMRV gearboxes play a critical role in precise motion control and positioning in robotic systems.
- Textile: They are used in machinery for spinning, weaving, and fabric processing.
- Pharmaceutical: NMRV gearboxes are utilized in pill coating machines, mixers, and other pharmaceutical processing equipment.
- Agriculture: They find applications in irrigation systems, conveyor systems, and various agricultural machinery.
- Packaging: NMRV gearboxes are used in packaging machinery to ensure controlled movement and accuracy.
- Automotive: They are used in automated assembly lines and manufacturing processes in the automotive industry.
- Printing: NMRV gearboxes contribute to precise movement and synchronization in printing machinery.
- Energy: They are employed in wind turbine systems, solar tracking systems, and other renewable energy applications.
The adaptability and efficiency of NMRV gearboxes make them a preferred choice in industries that require reliable and precise power transmission solutions.
editor by CX 2024-01-25