Produktbeskrivelse
Product Parameters
Editing and broadcasting of main materials
1. Body, die-casting aluminum alloy;
2. Worm shaft, 20 Crq steel, high temperature treatment;
3. Worm gear, nickel bronze alloy;
4. Aluminum alloy body, sandblasting and surface anti-corrosion treatment;
5. Cast iron body, painted with bIu RA5571.
Regular center distance specification editing and broadcasting
Center distance: 130 (unit: mm).
Output hole/shaft diameter: 11, 14, 18, 25, 28, 35, 42, 45 (unit: mm)
Detailed Photos
| NMRV-063-30-VS–AS-80B5-0.75KW-B3 | |||
| NMRV | Means hole-input with flange | ||
| NRV | Means shaft-input without flange | ||
| 063 | Centre-to-centre spacing of worm-gear speed reducer | ||
| 30 | ratio | ||
| VS | Double input shaft | F1(FA) | Flange putput shaft |
| AS | Single output shaft | AB | Double output shaft |
| PAM |
| 80B5 | Motor mounting facility |
| 0.75KW |
| B3 | Mounting position |
| N2 | NRV571 | NRV030 | NRV040 | NRV050 | NRV063 | NRV075 | NRV090 | NRV110 | NRV130 |
| 400 | 390 | 530 | 1571 | 1400 | 1830 | 2160 | 2390 | 3571 | 3950 |
| 250 | 460 | 620 | 1200 | 1650 | 2150 | 2520 | 2800 | 3530 | 4610 |
| 150 | 550 | 740 | 1420 | 1960 | 2450 | 2990 | 3310 | 4180 | 5470 |
| 100 | 630 | 850 | 1620 | 2250 | 2910 | 3430 | 3800 | 4790 | 6260 |
| 60 | 740 | 1000 | 1920 | 2660 | 3450 | 4060 | 4500 | 5680 | 7420 |
| 40 | 850 | 1150 | 2200 | 3050 | 3950 | 4650 | 5150 | 6500 | 8500 |
| 25 | 990 | 1350 | 2570 | 3570 | 4620 | 5440 | 6571 | 7600 | 9940 |
| 10 | 1350 | 1830 | 3490 | 4840 | 6270 | 7380 | 8180 | 10320 | 13500 |
|
|
|
|
|
|
|
|
|
|
|
| EN | 50 | 65 | 84 | 101 | 120 | 131 | 162 | 191 | 203 |
| B | 38 | 50 | 64 | 76 | 95 | 101 | 122 | 151 | 163 |
Use and safety guarantee
1. Please check and confirm the matching intensity between worm gear reducer and mechanical equipment before use to assure that it is in the safety range of worm gear reducer performance parameters
2. Worm gear reducer has filled with WA460 lubricating oil. Please replace the lubricating oil after the first starting of 400 hours and after then 4000 hours for lubricating oil replacing cycle
3. There should be enough lubrication in worm gear box and keep regular check with the oil level.
4. When installation. please be careful to avoid sharp instruments bruising the oil seals on output shaft to cause leakage
5. Please confirm the rotation direction before mechanical connection. If the rotation direction is not correct, it will possible injury or damage the devices
6. Please set safety covers in rotating position to avoid of injuring
7. Please pay full attention: it is very dangerous if there is off or falling when movin
| Hardhet: | Herdet tannoverflate |
|---|---|
| Installasjon: | 90 Degree |
| Oppsett: | Expansion |
| Girform: | Bevel Gear |
| Skritt: | Single-Step |
| Type: | Gear Reducer |
| Prøver: | US$ 30/Piece 1 stk (min. bestilling) | |
|---|
Replacing Parts vs. Replacing the Whole NMRV Gearbox
Whether to replace parts or the entire NMRV gearbox depends on the extent of the issue and the availability of replacement parts:
Replacing Parts: If a specific component is faulty or worn, you can often replace that part. This is a cost-effective solution and is feasible when the damage is isolated to a single component.
When to Replace Parts:
- Minor wear on gears, bearings, or seals.
- Specific components are damaged, but the rest of the gearbox is in good condition.
Replacing the Whole Gearbox: If multiple components are severely damaged, the gearbox housing is cracked, or the gearbox repeatedly experiences issues, replacing the entire unit might be a better option.
When to Replace the Whole Gearbox:
- Severe damage to multiple components.
- Cracks or damage to the gearbox housing.
- Frequent breakdowns and repairs.
Professional Assessment: In some cases, it’s best to consult a professional technician to assess the situation and provide recommendations. They can guide you on whether to replace parts or the entire unit based on the specific circumstances.
Ultimately, the decision between replacing parts and replacing the whole NMRV gearbox depends on factors such as the extent of damage, cost considerations, and the expertise of professionals.
Maintenance and Service of an NMRV Gearbox
Maintaining and servicing an NMRV (worm gear) gearbox is essential to ensure its proper functioning, longevity, and reliability. Here are the steps and practices involved in maintaining and servicing an NMRV gearbox:
- Lubrication: Regularly lubricate the gearbox as per the manufacturer’s recommendations. Use the appropriate lubricant to ensure smooth operation and to reduce friction and wear between the gear components.
- Inspection: Periodically inspect the gearbox for any signs of wear, damage, or leaks. Check for unusual noises, vibrations, or overheating during operation.
- Cleaning: Keep the gearbox and its surrounding area clean to prevent the buildup of dirt, debris, or contaminants that could potentially affect its performance.
- Tighten Fasteners: Check and tighten any fasteners, bolts, or screws that might have loosened due to vibrations during operation.
- Seal Inspection: Examine the seals and gaskets for signs of wear or leakage. Replace them if necessary to prevent oil leaks or ingress of contaminants.
- Temperature Monitoring: Monitor the operating temperature of the gearbox. Excessive heat can lead to premature wear and damage. Ensure proper ventilation and cooling if required.
- Address Issues Promptly: If you notice any unusual behavior, noise, or performance issues with the gearbox, address them promptly. Ignoring problems can lead to more significant damage over time.
- Replace Worn Parts: If any components, such as gears, bearings, or seals, are worn or damaged, replace them with genuine manufacturer-approved parts.
- Professional Service: For more extensive servicing, repairs, or overhauls, consult a professional with expertise in gearbox maintenance. They can disassemble, inspect, and reassemble the gearbox accurately.
By following these maintenance and servicing practices, you can ensure that your NMRV gearbox remains in optimal condition, delivering reliable performance and an extended operational lifespan.
Viktige funksjoner i en NMRV-girkasse
NMRV-girkasser, også kjent som snekkegirreduksjonsgir, tilbyr flere viktige funksjoner som gjør dem egnet for ulike bruksområder:
- Kompakt design: NMRV-girkasser er kjent for sin kompakte og plassbesparende design, noe som gjør dem ideelle for installasjoner med begrenset plass.
- Høy effektivitet: Disse girkassene tilbyr relativt høye virkningsgradsnivåer, noe som sikrer effektiv kraftoverføring og redusert energitap.
- Hastighetsreduksjon: NMRV-girkasser brukes primært til hastighetsreduksjonsapplikasjoner, der inngangshastigheten reduseres mens dreiemomentet økes.
- Momentmultiplikasjon: Snekke- og snekkehjulmekanismen muliggjør multiplikasjon av dreiemoment, noe som gjør NMRV-girkasser egnet for applikasjoner som krever høyt dreiemoment.
- Selvlåsende: Den spiralformede utformingen av snekken forårsaker selvlåsing, noe som forhindrer at utgangsakselen driver tilbake inngangsakselen og gir mekanisk låsing.
- Jevn drift: NMRV-girkasser tilbyr jevn og stillegående drift, noe som gjør dem egnet for applikasjoner der støyreduksjon er viktig.
- Bredt utvalg av forholdstall: Disse girkassene kommer i et bredt spekter av girforhold, slik at brukerne kan velge riktig forhold for sin spesifikke applikasjon.
- Lavt vedlikehold: Den enkle designen og få bevegelige deler bidrar til de lave vedlikeholdskravene til NMRV-girkasser.
- Allsidighet: NMRV-girkasser er allsidige og kan brukes i ulike bransjer og applikasjoner, inkludert transportbåndssystemer, matforedling, emballasje og mer.
Det er viktig å vurdere disse viktige funksjonene når du velger en NMRV-girkasse for din spesifikke applikasjon for å sikre optimal ytelse og effektivitet.
editor by CX 2023-11-18