China Hot selling Nmrv Aluminum Worm Gearbox with Three Phase Induction Gear Motor comer gearbox

Produktbeskrivelse

 

Produktbeskrivelse

Main Materials:
1)housing:aluminium alloy ADC12(size 571-090); die cast iron HT200(size 110-150);
2)Worm:20Cr, ZI Involute profile; carbonize&quencher heat treatment make gear surface hardness up to 56-62 HRC; After precision grinding, carburization layer’s thickness between 0.3-0.5mm.
3)Worm Wheel:wearable stannum alloy CuSn10-1

Detailed Photos

Combination Options:
Input:with input shaft, With square flange,With IEC standard input flange
Output:with torque arm, output flange, single output shaft, double output shaft, plastic cover
Worm reducers are available with diffferent combinations: NMRV+NMRV, NMRV+NRV, NMRV+PC, NMRV+UDL, NMRV+MOTORS

Exploded View:

Product Parameters

Gammel modell	Ny modell	Forhold	Senteravstand	Makt	Inngangsdiameter	Utgangsdiameter	Utgangsmoment	Vekt
RV571		7.5~100	25 mm	0,06 kW ~ 0,12 kW	Φ9	Φ11	21 Nm	0,7 kg
RV030	RW030	7.5~100	30 mm	0,06 kW ~ 0,25 kW	Φ9 (Φ11)	Φ14	45 Nm	1,2 kg
RV040	RW040	7.5~100	40 mm	0,09 kW ~ 0,55 kW	Φ9(Φ11,Φ14)	Φ18 (Φ19)	84 Nm	2,3 kg
RV050	RW050	7.5~100	50 mm	0,12 kW ~ 1,5 kW	Φ11 (Φ14, Φ19)	Φ25 (Φ24)	160 Nm	3,5 kg
RV063	RW063	7.5~100	63 mm	0,18 kW ~ 2,2 kW	Φ14 (Φ19, Φ24)	Φ25 (Φ28)	230 Nm	6,2 kg
RV075	RW075	7.5~100	75 mm	0,25 kW ~ 4,0 kW	Φ14 (Φ19, Φ24, Φ28)	Φ28 (Φ35)	410 Nm	9,0 kg
RV090	RW090	7.5~100	90 mm	0,37 kW ~ 4,0 kW	Φ19 (Φ24, Φ28)	Φ35 (Φ38)	725 Nm	13,0 kg
RV110	RW110	7.5~100	110 mm	0,55 kW ~ 7,5 kW	Φ19 (Φ24, Φ28, Φ38)	Φ42	1050 Nm	35,0 kg
RV130	RW130	7.5~100	130 mm	0,75 kW ~ 7,5 kW	Φ24(Φ28, Φ38)	Φ45	1550 Nm	48,0 kg
RV150	RW150	7.5~100	150 mm	2,2 kW ~ 15 kW	Φ28 (Φ38, Φ42)	Φ50		84,0 kg

GMRV-konturdimensjon:

GMRV	EN	B	C	C1	D(H8)	E(h8)	F	G	G1	H	H1	jeg	M	N	Å	P	Q	R	S	T	BL	β	b	t	V
030	80	97	54	44	14	55	32	56	63	65	29	55	40	57	30	75	44	6.5	21	5.5	M6*10(n=4)	0°	5	16.3	27
040	100	121.5	70	60	18(19)	60	43	71	78	75	36.5	70	50	71.5	40	87	55	6.5	26	6.5	M6*10(n=4)	45°	6	20.8(21.8)	35
050	120	144	80	70	25(24)	70	49	85	92	85	43.5	80	60	84	50	100	64	8.5	30	7	M8*12(n=4)	45°	8	28.3(27.3)	40
063	144	174	100	85	25(28)	80	67	103	112	95	53	95	72	102	63	110	80	8.5	36	8	M8*12(n=8)	45°	8	28.3(31.3)	50
075	172	205	120	90	28(35)	95	72	112	120	115	57	112.5	86	119	75	140	93	11	40	10	M8*14(n=8)	45°	8(10)	31.3(38.3)	60
090	206	238	140	100	35(38)	110	74	130	140	130	67	129.5	103	135	90	160	102	13	45	11	M10*16(n=8)	45°	10	38.3(41.3)	70
110	255	295	170	115	42	130	–	144	155	165	74	160	127.5	167.5	110	200	125	14	50	14	M10*18(n=8)	45°	12	45.3	85
130	293	335	200	120	45	180	–	155	170	215	81	179	146.5	187.5	130	250	140	16	60	15	M12*20(n=8)	45°	14	48.8	100
150	340	400	240	145	50	180	–	185	200	215	96	210	170	230	150	250	180	18	72.5	18	M12*22(n=8)	45°	14	53.8	120

Company Profile

About CHINAMFG Transmission:
We are a professional reducer manufacturer located in HangZhou, ZHangZhoug province.
Our leading products is  full range of RV571-150 worm reducers , also supplied GKM hypoid helical gearbox, GRC inline helical gearbox, PC units, UDL Variators and AC Motors, G3 helical gear motor.
Products are widely used for applications such as: foodstuffs, ceramics, packing, chemicals, pharmacy, plastics, paper-making, construction machinery, metallurgic mine, environmental protection engineering, and all kinds of automatic lines, and assembly lines.
With fast delivery, superior after-sales service, advanced producing facility, our products sell well  both at home and abroad. We have exported our reducers to Southeast Asia, Eastern Europe and Middle East and so on.Our aim is to develop and innovate on basis of high quality, and create a good reputation for reducers.

 Packing information:Plastic Bags+Cartons+Wooden Cases , or on request
We participate Germany Hannver Exhibition-ZheJiang PTC Fair-Turkey Win Eurasia 

Logistics

After Sales Service

1.Maintenance Time and Warranty:Within 1 year after receiving goods.
2.Other Service: Including modeling selection guide, installation guide, and problem resolution guide, etc.

Vanlige spørsmål

1.Q:Can you make as per customer drawing?
   A: Yes, we offer customized service for customers accordingly. We can use customer’s nameplate for gearboxes.
2.Q:What is your terms of payment ?
   A: 30% deposit before production,balance T/T before delivery.
3.Q:Are you a trading company or manufacturer?
   A:We are a manufacurer with advanced equipment and experienced workers.
4.Q:What’s your production capacity?
   A:8000-9000 PCS/MONTH
5.Q:Free sample is available or not?
   A:Yes, we can supply free sample if customer agree to pay for the courier cost
6.Q:Do you have any certificate?
   A:Yes, we have CE certificate and SGS certificate report.

Contact information:
Fru Lingel Pan
For any questions just feel free ton contact me. Many thanks for your kind attention to our company!

Søknad:	Motor, Maskiner, Marine, Landbruksmaskiner, Industri
Funksjon:	Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Oppsett:	Rett vinkel
Hardhet:	Herdet tannoverflate
Installasjon:	Horisontal type
Skritt:	Dobbelttrinn

Prøver:	US$ 35/Piece 1 stk (min. bestilling) | Be om prøve

Tilpasning:	Tilgjengelig | Tilpasset forespørsel

Troubleshooting Abnormal Noises in an NMRV Gearbox

Abnormal noises from an NMRV gearbox can be troublesome and might indicate underlying issues. Follow these steps to troubleshoot and resolve the problem:

1. Identify the Noise: Listen closely to the noise and determine if it’s a grinding, whining, or knocking sound.
2. Check Lubrication: Insufficient or contaminated lubrication can lead to noises. Ensure the gearbox is properly lubricated.
3. Inspect Gears: Examine the gear teeth for wear, damage, or misalignment.
4. Look for Foreign Objects: Foreign objects inside the gearbox can cause noise. Clean and inspect the interior.
5. Check Bearings: Worn or damaged bearings can be noisy. Inspect and replace them if necessary.
6. Inspect Seals: Damaged seals can allow contaminants in, affecting performance. Replace damaged seals.
7. Examine Housing: Ensure the gearbox housing is intact without cracks or misalignment.
8. Review Load Conditions: Excessive loads can lead to noise. Ensure the gearbox isn’t overloaded.
9. Check Mounting: Confirm the gearbox is properly mounted and aligned.
10. Consult Guidelines: Refer to manufacturer guidelines for specific troubleshooting steps.
11. Professional Help: If the issue persists, seek help from a professional technician or manufacturer.

Follow these steps to identify and rectify abnormal noises in your NMRV gearbox.

Vanlige problemer forbundet med NMRV-girkasser

NMRV-girkasser (snekkegir) er pålitelige og slitesterke, men som alle mekaniske systemer kan de oppleve visse problemer over tid. Her er noen vanlige problemer som kan være forbundet med NMRV-girkasser:

• Overoppheting: Utilstrekkelig smøring eller overdreven belastning kan føre til overoppheting, noe som kan forårsake akselerert slitasje og potensiell skade på girkassekomponentene.
• Støy og vibrasjon: Uvanlige lyder eller overdreven vibrasjon under drift kan tyde på feiljustering, slitte gir eller skadede lagre.
• Lekkasje: Oljelekkasjer kan oppstå på grunn av slitte tetninger eller skadede pakninger, noe som kan føre til tap av smøremiddel og potensiell forurensning av miljøet rundt.
• Slitte gir: Over tid kan tannhjulene slites ned på grunn av friksjon og belastning. Dette kan føre til redusert effektivitet, økt slakk og svekket ytelse.
• Feiljustering: Feil installasjon eller montering kan føre til feiljustering mellom inn- og utgående aksler, noe som forårsaker økt friksjon, slitasje og redusert effektivitet.
• Motreaksjon: For mye slark mellom snekkegiret og motgiret kan føre til dårlig posisjoneringsnøyaktighet og redusert effektivitet i bevegelseskontrollapplikasjoner.
• Dårlig smøring: Bruk av feil eller utilstrekkelige smøremidler, eller forsømmelse av riktig smørevedlikehold, kan føre til økt friksjon, slitasje og potensiell svikt i girkassekomponenter.
• Skade på tetningen: Slitte eller skadede pakninger kan føre til oljelekkasjer og forurensning, noe som påvirker girkassens ytelse og levetid.
• Akselslitasje: Over tid kan inn- og utgående aksler oppleve slitasje på grunn av belastning og friksjon, noe som påvirker girkassens generelle drift.
• Korrosjon: Eksponering for tøffe miljøer eller etsende stoffer kan føre til korrosjon av girkassekomponenter, noe som reduserer levetiden deres.

For å forebygge og håndtere disse vanlige problemene er det avgjørende å følge riktige vedlikeholds- og servicerutiner, bruke smøremidler av høy kvalitet, håndtere problemer raskt og konsultere fagfolk ved behov. Regelmessige inspeksjoner og proaktivt vedlikehold kan bidra til å forlenge levetiden og påliteligheten til NMRV-girkasser.

Installing an NMRV Gearbox

Installing an NMRV gearbox requires careful attention to ensure proper alignment and secure attachment. Here’s a general guide to the installation process:

1. Prepare the Workspace: Ensure you have a clean and organized workspace with the necessary tools and equipment.
2. Positioning: Place the NMRV gearbox in the desired position on your machinery, making sure it aligns with the input and output components.
3. Alignment: Ensure that the input shaft of the gearbox is aligned with the driving shaft from the power source. Misalignment can lead to premature wear and reduced efficiency.
4. Mounting: Securely mount the NMRV gearbox to the machinery frame using appropriate fasteners. Follow the manufacturer’s recommendations for torque specifications.
5. Input Coupling: Connect the input shaft of the gearbox to the driving shaft using a suitable coupling. This coupling should be properly aligned to avoid unnecessary stress on the gearbox components.
6. Output Coupling: Similarly, connect the output shaft of the gearbox to the driven component using an appropriate coupling.
7. Lubrication: Before operation, make sure to fill the gearbox with the recommended lubricant to ensure proper gear meshing and reduce friction.
8. Testing: Run the machinery briefly to check for any unusual noises, vibrations, or leaks. Make any necessary adjustments.

It’s crucial to follow the manufacturer’s installation guidelines and specifications to ensure a smooth and trouble-free installation process. Proper installation contributes to the longevity and reliable performance of your NMRV gearbox.

editor by CX 2023-09-27