China RV025-150 Series Worm Gearbox for Pulley Drive aluminum worm gearbox

Solution Description

Main Characteristics:
1) Made of high high quality aluminum alloy, mild bodyweight and non-rusting
two) Massive output torque and higher radiating effectiveness
three) Clean managing and low sounds, can perform long time in dreadful problem
4) Great-hunting appearance, resilient service daily life and little quantity
five) Appropriate for omnibearing installation
Principal Resources:
one)housing:aluminium alloy ADC12(dimensions 571-090) die solid iron HT200(measurement 110-one hundred fifty)
2)Worm:20Cr, ZI Involute profile carbonize&quencher heat treatment method make gear area hardness up to fifty six-62 HRC After precision grinding, carburization layer’s thickness amongst .3-.5mm.
3)Worm Wheel:wearable stannum alloy CuSn10-1
Mix Options:
Input:with enter shaft, With sq. flange,With IEC common input flange
Output:with torque arm, output flange, single output shaft, double output shaft, plastic go over
Worm reducers are obtainable with diffferent mixtures: NMRV+NMRV, NMRV+NRV, NMRV+Laptop, NMRV+UDL, NMRV+MOTORS

Detaljerte bilder

Elementparametere

Gammel modell	Ny modell	Forhold	Senteravstand	Elektrisitet	Inngangsdiameter	Utgangsdiameter	Utgangsmoment	Kroppsvekt
RV571		7.5~100	25 mm	0,06 kW ~ 0,12 kW	Φ9	Φ11	21 Nm	0,7 kg
RV030	RW030	syv,5 ~ hundre	30 mm	0,06 kW ~ 0,25 kW	Φ9 (Φ11)	Φ14	45 Nm	1,2 kg
RV040	RW040	sju,5 ~ ett hundre	40 mm	0,09 kW ~ 0,55 kW	Φ9(Φ11,Φ14)	Φ18 (Φ19)	84 Nm	2,3 kg
RV050	RW050	syv,5 ~ hundre	50 mm	0,12 kW ~ 1,5 kW	Φ11 (Φ14, Φ19)	Φ25 (Φ24)	160 Nm	3,5 kg
RV063	RW063	7.5~100	63 mm	0,18 kW ~ 2,2 kW	Φ14 (Φ19, Φ24)	Φ25 (Φ28)	230 Nm	6,2 kg
RV075	RW075	syv,5~100	75 mm	0,25 kW ~ 4,0 kW	Φ14 (Φ19, Φ24, Φ28)	Φ28 (Φ35)	410 Nm	9,0 kg
RV090	RW090	sju,5 ~ ett hundre	90 mm	0,37 kW ~ 4,0 kW	Φ19 (Φ24, Φ28)	Φ35 (Φ38)	725 Nm	13,0 kg
RV110	RW110	syv,5~100	110 mm	0,55 kW ~ 7,5 kW	Φ19 (Φ24, Φ28, Φ38)	Φ42	1050 Nm	35,0 kg
RV130	RW130	7.5~100	130 mm	0,75 kW ~ 7,5 kW	Φ24(Φ28, Φ38)	Φ45	1550 Nm	48,0 kg
RV150	RW150	syv,5 ~ hundre	150 mm	2,2 kW ~ 15 kW	Φ28 (Φ38, Φ42)	Φ50		eighty four.0kgs

Exploded See:

GRV Outline Dimension:

GRV	EN	B	B1	C	C1	D(H8)	D1(j6)	E(h8)	F	G	G1	H	H1	J	M	N	Å	P	Q	R	S	T	BL	β	b	b1	t	t1	f1	V
030	80	97	20	54	førti fire	14	nine	femtifem	32	56	63	65	29	fifty one	førti	57	30	syttifem	førti fire	seks,5	21	five.5	M6*10(n=4)	0°	five	three	16. tre	10.2	–	27
040	100	121.5	23	70	seksti	18(19)	elleve	60	førti tre	71	seventy eight	75	36.fem	60	50	seventy one.five	40	87	femtifem	six.five	26	6.5	M6*ti(n=4)	45°	6	4	20.8(21.8)	12.five	–	35
050	120	ett hundre og førti fire	tretti	80	70	25(24)	fjorten	70	førti ni	85	92	85	forty three.5	syttifire	60	84	femti	100	64	8.5	30	sju	M8*tolv(n=4)	45°	8	five	28.3(27.3)	16	M6	40
063	ett hundre og førti fire	174	40	100	åttifem	25(28)	19	åtti	sekstisyv	103	112	95	femti tre	nitti	syttito	102	seksti tre	one hundred ten	åtti	eight.5	36	åtte	M8*tolv(n=8)	45°	8	6	28.3(31.3)	21.5	M6	50
075	172	205	femti	120	90	28(35)	24	nittifem	syttito	112	hundre og tjue	hundre og femten	fifty seven	105	86	119	75	hundre og førti	93	elleve	førti	ti	M8*fourteen(n=8)	45°	eight(ten)	8	31.3(38.3)	27	M8	60
090	206	238	50	hundre og førti	hundre	35(38)	24	one hundred ten	74	hundre og tretti	hundre og førti	130	sekstisyv	one hundred twenty five	103	135	nitti	hundre og seksti	102	thirteen	førti fem	11	M10*16(n=8)	45°	ti	åtte	38.3(forty one.3)	27	M8	70
110	255	295	seksti	hundre og sytti	a hundred and fifteen	42	28	130	–	144	a hundred and fifty five	a hundred sixty five	syttifire	142	127.fem	167.five	hundre og ti	200	125	14	50	fjorten	M10*atten(n=8)	45°	twelve	åtte	45.3	31	M10	åttifem
ett hundre og tretti	293	335	80	to hundre	120	førti fem	30	180	–	a hundred and fifty five	ett hundre og sytti	215	81	162	146.five	187.5	hundre og tretti	250	hundre og førti	16	60	fifteen	M12*twenty(n=8)	45°	fjorten	8	førtiåtte,8	33	M10	100
hundre og femti	340	400	åtti	240	one hundred forty five	50	35	hundre og åtti	–	185	to hundre	215	ninety six	195	ett hundre og sytti	230	150	250	hundre og åtti	18	72.5	atten	M12*22(n=8)	45°	fjorten	ti	53.eight	38	M12	120

Firmaprofil

Om CZPT Transmission:
We are a professional reducer manufacturer situated in HangZhou, ZHangZhoug province.
Our leading merchandise is full assortment of RV571-150 worm reducers , also provided GKM hypoid helical gearbox, GRC inline helical gearbox, Pc units, UDL Variators and AC Motors, G3 helical gear motor.
Goods are extensively utilized for programs such as: foodstuffs, ceramics, packing, chemical compounds, pharmacy, plastics, paper-making, construction machinery, metallurgic mine, environmental protection engineering, and all sorts of automatic traces, and assembly traces.
With quickly delivery, outstanding after-sales services, superior generating facility, our goods sell well both at property and overseas. We have exported our reducers to Southeast Asia, Jap Europe and the Middle East and so on.Our goal is to produce and innovate on the foundation of large high quality, and produce a good popularity for reducers.

Packing information:Plastic Baggage+Cartons+Wood Instances , or on request
We take part Germany Hannver Exhibition-ZheJiang PTC Honest-Turkey Win Eurasia

Logistics

After Income Service

1.Servicing Time and Guarantee:Inside 1 12 months after receiving products.
two.Other Support: Including modeling selection guide, set up information, and issue resolution information, etc.

Vanlige spørsmål

1.Q:Can you make as for every client drawing?
A: Indeed, we supply tailored service for consumers appropriately. We can use customer’s nameplate for gearboxes.
2.Q: Hva er betalingsbetingelsene dine?
   A: 30% deposit before manufacturing,stability T/T ahead of supply.
three.Q:Are you a trading company or producer?
   A:We are a manufacurer with sophisticated gear and seasoned workers.
four.Q:What is actually your creation potential?
   A: 8000–9000 stk/måned
five.Q:Free of charge sample is available or not?
   A:Sure, we can source cost-free sample if customer concur to pay for the courier value
six.Q:Do you have any certification?
   A:Sure, we have CE certificate and SGS certification report.

Get in touch with data:
Fru Lingel Pan
For any questions just feel cost-free ton get in touch with me. Numerous thanks for your kind focus to our company!

US $10-220
/ Stykke
| 1 stk

(Min. bestilling)

###

Søknad:	Motor, Maskiner, Marine, Landbruksmaskiner, Industri
Funksjon:	Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Oppsett:	Rett vinkel
Hardhet:	Herdet tannoverflate
Installasjon:	Horisontal type
Skritt:	Dobbelttrinn

###

Prøver:	US$ 10/Piece 1 stk (min. bestilling) \| Be om prøve

###

Tilpasning:	Tilgjengelig \| Tilpasset forespørsel

###

Gammel modell	Ny modell	Forhold	Senteravstand	Makt	Inngangsdiameter	Utgangsdiameter	Utgangsmoment	Vekt
RV025		7.5~100	25 mm	0,06 kW ~ 0,12 kW	Φ9	Φ11	21 Nm	0,7 kg
RV030	RW030	7.5~100	30 mm	0,06 kW ~ 0,25 kW	Φ9 (Φ11)	Φ14	45 Nm	1,2 kg
RV040	RW040	7.5~100	40 mm	0,09 kW ~ 0,55 kW	Φ9(Φ11,Φ14)	Φ18 (Φ19)	84 Nm	2,3 kg
RV050	RW050	7.5~100	50 mm	0,12 kW ~ 1,5 kW	Φ11 (Φ14, Φ19)	Φ25 (Φ24)	160 Nm	3,5 kg
RV063	RW063	7.5~100	63 mm	0,18 kW ~ 2,2 kW	Φ14 (Φ19, Φ24)	Φ25 (Φ28)	230 Nm	6,2 kg
RV075	RW075	7.5~100	75 mm	0,25 kW ~ 4,0 kW	Φ14 (Φ19, Φ24, Φ28)	Φ28 (Φ35)	410 Nm	9,0 kg
RV090	RW090	7.5~100	90 mm	0,37 kW ~ 4,0 kW	Φ19 (Φ24, Φ28)	Φ35 (Φ38)	725 Nm	13,0 kg
RV110	RW110	7.5~100	110 mm	0,55 kW ~ 7,5 kW	Φ19 (Φ24, Φ28, Φ38)	Φ42	1050 Nm	35,0 kg
RV130	RW130	7.5~100	130 mm	0,75 kW ~ 7,5 kW	Φ24(Φ28, Φ38)	Φ45	1550 Nm	48,0 kg
RV150	RW150	7.5~100	150 mm	2,2 kW ~ 15 kW	Φ28 (Φ38, Φ42)	Φ50		84,0 kg

###

GRV	EN	B	B1	C	C1	D(H8)	D1(j6)	E(h8)	F	G	G1	H	H1	J	M	N	Å	P	Q	R	S	T	BL	β	b	b1	t	t1	f1	V
030	80	97	20	54	44	14	9	55	32	56	63	65	29	51	40	57	30	75	44	6.5	21	5.5	M6*10(n=4)	0°	5	3	16.3	10.2	–	27
040	100	121.5	23	70	60	18(19)	11	60	43	71	78	75	36.5	60	50	71.5	40	87	55	6.5	26	6.5	M6*10(n=4)	45°	6	4	20.8(21.8)	12.5	–	35
050	120	144	30	80	70	25(24)	14	70	49	85	92	85	43.5	74	60	84	50	100	64	8.5	30	7	M8*12(n=4)	45°	8	5	28.3(27.3)	16	M6	40
063	144	174	40	100	85	25(28)	19	80	67	103	112	95	53	90	72	102	63	110	80	8.5	36	8	M8*12(n=8)	45°	8	6	28.3(31.3)	21.5	M6	50
075	172	205	50	120	90	28(35)	24	95	72	112	120	115	57	105	86	119	75	140	93	11	40	10	M8*14(n=8)	45°	8(10)	8	31.3(38.3)	27	M8	60
090	206	238	50	140	100	35(38)	24	110	74	130	140	130	67	125	103	135	90	160	102	13	45	11	M10*16(n=8)	45°	10	8	38.3(41.3)	27	M8	70
110	255	295	60	170	115	42	28	130	–	144	155	165	74	142	127.5	167.5	110	200	125	14	50	14	M10*18(n=8)	45°	12	8	45.3	31	M10	85
130	293	335	80	200	120	45	30	180	–	155	170	215	81	162	146.5	187.5	130	250	140	16	60	15	M12*20(n=8)	45°	14	8	48.8	33	M10	100
150	340	400	80	240	145	50	35	180	–	185	200	215	96	195	170	230	150	250	180	18	72.5	18	M12*22(n=8)	45°	14	10	53.8	38	M12	120

US $10-220
/ Stykke
| 1 stk

(Min. bestilling)

###

Søknad:	Motor, Maskiner, Marine, Landbruksmaskiner, Industri
Funksjon:	Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Oppsett:	Rett vinkel
Hardhet:	Herdet tannoverflate
Installasjon:	Horisontal type
Skritt:	Dobbelttrinn

###

Prøver:	US$ 10/Piece 1 stk (min. bestilling) \| Be om prøve

###

Tilpasning:	Tilgjengelig \| Tilpasset forespørsel

###

Gammel modell	Ny modell	Forhold	Senteravstand	Makt	Inngangsdiameter	Utgangsdiameter	Utgangsmoment	Vekt
RV025		7.5~100	25 mm	0,06 kW ~ 0,12 kW	Φ9	Φ11	21 Nm	0,7 kg
RV030	RW030	7.5~100	30 mm	0,06 kW ~ 0,25 kW	Φ9 (Φ11)	Φ14	45 Nm	1,2 kg
RV040	RW040	7.5~100	40 mm	0,09 kW ~ 0,55 kW	Φ9(Φ11,Φ14)	Φ18 (Φ19)	84 Nm	2,3 kg
RV050	RW050	7.5~100	50 mm	0,12 kW ~ 1,5 kW	Φ11 (Φ14, Φ19)	Φ25 (Φ24)	160 Nm	3,5 kg
RV063	RW063	7.5~100	63 mm	0,18 kW ~ 2,2 kW	Φ14 (Φ19, Φ24)	Φ25 (Φ28)	230 Nm	6,2 kg
RV075	RW075	7.5~100	75 mm	0,25 kW ~ 4,0 kW	Φ14 (Φ19, Φ24, Φ28)	Φ28 (Φ35)	410 Nm	9,0 kg
RV090	RW090	7.5~100	90 mm	0,37 kW ~ 4,0 kW	Φ19 (Φ24, Φ28)	Φ35 (Φ38)	725 Nm	13,0 kg
RV110	RW110	7.5~100	110 mm	0,55 kW ~ 7,5 kW	Φ19 (Φ24, Φ28, Φ38)	Φ42	1050 Nm	35,0 kg
RV130	RW130	7.5~100	130 mm	0,75 kW ~ 7,5 kW	Φ24(Φ28, Φ38)	Φ45	1550 Nm	48,0 kg
RV150	RW150	7.5~100	150 mm	2,2 kW ~ 15 kW	Φ28 (Φ38, Φ42)	Φ50		84,0 kg

###

GRV	EN	B	B1	C	C1	D(H8)	D1(j6)	E(h8)	F	G	G1	H	H1	J	M	N	Å	P	Q	R	S	T	BL	β	b	b1	t	t1	f1	V
030	80	97	20	54	44	14	9	55	32	56	63	65	29	51	40	57	30	75	44	6.5	21	5.5	M6*10(n=4)	0°	5	3	16.3	10.2	–	27
040	100	121.5	23	70	60	18(19)	11	60	43	71	78	75	36.5	60	50	71.5	40	87	55	6.5	26	6.5	M6*10(n=4)	45°	6	4	20.8(21.8)	12.5	–	35
050	120	144	30	80	70	25(24)	14	70	49	85	92	85	43.5	74	60	84	50	100	64	8.5	30	7	M8*12(n=4)	45°	8	5	28.3(27.3)	16	M6	40
063	144	174	40	100	85	25(28)	19	80	67	103	112	95	53	90	72	102	63	110	80	8.5	36	8	M8*12(n=8)	45°	8	6	28.3(31.3)	21.5	M6	50
075	172	205	50	120	90	28(35)	24	95	72	112	120	115	57	105	86	119	75	140	93	11	40	10	M8*14(n=8)	45°	8(10)	8	31.3(38.3)	27	M8	60
090	206	238	50	140	100	35(38)	24	110	74	130	140	130	67	125	103	135	90	160	102	13	45	11	M10*16(n=8)	45°	10	8	38.3(41.3)	27	M8	70
110	255	295	60	170	115	42	28	130	–	144	155	165	74	142	127.5	167.5	110	200	125	14	50	14	M10*18(n=8)	45°	12	8	45.3	31	M10	85
130	293	335	80	200	120	45	30	180	–	155	170	215	81	162	146.5	187.5	130	250	140	16	60	15	M12*20(n=8)	45°	14	8	48.8	33	M10	100
150	340	400	80	240	145	50	35	180	–	185	200	215	96	195	170	230	150	250	180	18	72.5	18	M12*22(n=8)	45°	14	10	53.8	38	M12	120

Girkasse med reduksjonsgir for snekkegir

Cheaper than planetary gearboxes In many cases, worm gear reducer gearboxes are a popular alternative to planetary gearboxes. A worm gear reducer gearbox is a mechanical device with vertical input and output shafts. This allows for very high reduction ratios. They are typically used in high-reduction situations such as machine tools.
Worm gears are cheaper than traditional gearboxes. They also have many benefits, including noise reduction. The output shaft of the worm gear reducer gearbox is almost 90 degrees from the motor input shaft, making it ideal for high-torque applications.
The worm gear reducer gearbox adopts an aluminum body, which is light in weight and high in operation efficiency. Additionally, they are available with hollow shafts and mounting flanges. In terms of initial cost, worm gear reducer gearboxes are cheaper than planetary gearboxes. In addition, they have better efficiency and longer service life.
Worm drives are also ideal for portable battery-powered lifting equipment. The high gear ratio of the worm gear ensures that it does not reverse drive. The worm gear has a spring-applied brake that holds the motor in place.
Planetary gearboxes are popular among industrial users. The efficiency of planetary gearboxes is important for practical applications.

pocket

The compact worm gear unit consists of a housing with an inner cavity. It has two side walls, one on either side of the front cover (13) and one on both sides of the rear cover (14). The front end cap is screwed onto the housing and the inner cavity is accessed through the rear end cap.
The compact worm gear unit can be configured to suit your application. They have many advantages, including saving space and increasing torque. The range includes single-envelope and double-envelope versions, available in a number of different power ratings. Additionally, they are IP65-rated, making them ideal for applications involving high radial or axial forces.
The compact worm reducer gearbox is a simple but effective worm drive. Its worm gear 16 meshes with the output shaft and rotates relatively stably. It also has a front-end cap and rear bearing. This enables the compact worm reducer gearbox to reduce vibration without damaging the output shaft.
Compact worm gear reducer gearboxes are ideal for many applications and offer high efficiency. The compact design means you can mount them on the motor’s flange or base. Its durable construction makes it ideal for a variety of industries. They are extremely durable and can handle high-pressure and washdown conditions. They also come standard with a synthetic shaft.

high efficiency

High-efficiency worm gear reducer gearboxes are ideal for applications that require precision, repeatability, and efficient performance. These reducer gearboxes are designed with state-of-the-art servo motor technology to provide tight integration and an angular backlash of less than two arc minutes. The reduction ratio can be lower if the application requires it.
Rising energy costs have led to an increased focus on the efficiency of drives. In response to this, manufacturers have increased the efficiency of worm gear reducer gearboxes through a number of technical improvements. By minimizing losses from rolling and sliding friction, worm gear reducer gearboxes are more efficient than their counterparts.
The high-efficiency worm reducer gearbox is simple in design and has the characteristics of a compact structure, high-speed ratio, low power consumption, and self-locking. Other advantages of these reducer gearboxes include low noise and long service life. Many also have built-in control systems that allow manual and remote adjustments. They also feature automatic shutdown protection and thermal protection.
High-efficiency worm reducer gearboxes can be used for mechanical acceleration. The input hypoid gear is usually made of steel, while the output hypoid gear is usually made of bronze. Bronze is a soft metal that is good at absorbing shock loads. However, bronze requires work hardening to achieve optimum hardness. For large worm gears, this process can take 300 to 550 hours.

low clearance

A low-clearance worm reducer gearbox is a device used to adjust the speed of a rotating shaft. It uses a worm gear consisting of two members. One worm is at one end of the shaft and the other is at the other end. Both worms are screwed into the synchronous drive structure.
Low clearance worm gear reducer gearboxes can be produced on conventional worm gear production lines without overlapping investments. These units are usually made of soft rubber. Also, they are relatively quiet in operation. These machines are designed so that they are suitable for use in elevators. The softer material in the worm gear also helps absorb shock loads.
The tooth profile of the worm gear is designed to change with the axial movement of the worm. Worms have thinner right teeth and thicker left teeth. As the worm moves to the right, its teeth mesh with the worm gear, reducing backlash.
There are many different types of worm gears. The design of gears depends on many factors, including backlash, thermal design, friction factors and lubrication. Worm gears are made of several different materials. Some different types of materials used in worm gears require special lubrication.

quieter

The quieter worm reducer gearbox is designed to reduce the noise level of the rotating gear motor. The device has more gear teeth in meshing contact with the gears, which helps it run more quietly. In addition to being quieter than other transmissions, it’s also less expensive than its counterparts.
Worm gearboxes can be used for different applications, but they are not as efficient as helical gearboxes. Worm reducer gearboxes are cheaper but less than 90% efficient. Higher gear ratios reduce efficiency, so worm gear reducer gearboxes are better suited for applications that require low-speed torque. The cost of buying a worm gearbox will depend on the horsepower and gear ratios required.
Worm reducer gearboxes are also more comfortable to use than planetary gearboxes. They don’t vibrate and heat up quickly, making them an excellent choice for low to medium horsepower applications. Worm gear reducer gearboxes can be upgraded to improve their performance by combining with other gear trains or gearboxes.

easy to replace

An easily replaceable worm gear reducer gearbox can save you a lot of money. A worm gear reducer gearbox is part of a chain drive and allows you to change gear ratios quickly and easily. Worm gear reducer gearboxes can be easily replaced in a number of ways. It’s a good idea to read the manufacturer’s manual before replacing a worm gear reducer gearbox. Make sure you have the instructions available so you can refer to them in the future.
Worm gear reducer gearboxes offer many advantages, including long service life and low noise. They are also designed with a 90-degree output shaft for easy installation. Another advantage of these gear reducer gearboxes is that they can be used with both solid and hollow output shafts. This means less maintenance and downtime.
Worm gear reducer gearboxes are widely used. Most gear manufacturers have large inventories. Worm gears also have uniform mounting dimensions. Dimensional consistency means you don’t have to worry about matching the shaft length and diameter to the worm gear. You can easily find a replacement worm gear reducer gearbox for your equipment.
When replacing the worm gear reducer gearbox, check the lubricating oil recommended by the machine. If not included, use original gear oil. Be sure to follow the manufacturer’s instructions carefully.

editor by czh 2023-02-04