Produktbeskrivelse
RV series Characteristics
- RV – Sizes:–150
- Input Options: with input shaft, With Square flange,With Input Flange
- Input Power 0.06 to 11 kW
- RV-Size from 030 to 105 in die-cast aluminium alloy budy and over 110 in cast iron
- Ratios between 5 and 100
- Max torque 1550 N.m and admissible output radial loads max 8771 N
- Aluminium units are supplied complete with synthetic oil and allow for universal mounting positions, with no need to modify lubricant quantity
- Worm wheel: Copper (KK Cu).
- Loading capacity in accordance with: ISO 9001:2015/GB/T 19001-2016
- Size 030 and over are painted with RAL 5571 blue
- Worm gear reducers are available with diffferent combinations: NMRV+NMRV, NMRVpower+NMRV, JWB+NMRV
- NMRV, NRV+VS,NMRV+AS,NMRV+VS,NMRV+F
- Options: torque arm, output flange, viton oil seals, low/high temperature oil, filling/drain/breather/level plug,Small gap
Basic models can be applied to a wide range of power reduction ratios from 5 to 1000.
Warranty: One year from date of delivery.
| WORM GEARBOX | |||||
| SNW SERIES | Output Speed Range: | ||||
| Type | Old Type | Utgangsmoment | Output Shaft Dia. | 14rpm-280rpm | |
| SNW030 | RV030 | 21 Nm | φ14 | Applicable Motor Power: | |
| SNW040 | RV040 | 45 Nm | φ19 | 0.06kW-11kW | |
| SNW050 | RV050 | 84 Nm | φ25 | Input Options1: | |
| SNW063 | RV063 | 160 Nm | φ25 | With Inline AC Motor | |
| SNW075 | RV075 | 230 Nm | φ28 | Input Options2: | |
| SNW090 | RV090 | 410 Nm | φ35 | With Square flange | |
| SNW105 | RV105 | 630N.m | φ42 | Input Options3: | |
| SNW110 | RV110 | 725 Nm | φ42 | With Input Shaft | |
| SNW130 | RV130 | 1050 Nm | φ45 | Input Options4: | |
| SNW150 | RV150 | 1550 Nm | φ50 | With Input Flange |
Starshine Drive
ZheJiang CHINAMFG Drive Co.,Ltd,the predecessor was a state-owned military mould enterprise, was established in 1965. CHINAMFG specializes in the complete power transmission solution for high-end equipment manufacturing industries based on the aim of “Platform Product, Application Design and Professional Service”.
Starshine have a strong technical force with over 350 employees at present, including over 30 engineering technicians, 30 quality inspectors, covering an area of 80000 square CHINAMFG and kinds of advanced processing machines and testing equipments. We have a good foundation for the industry application development and service of high-end speed reducers & variators owning to the provincial engineering technology research center,the lab of gear speed reducers, and the base of modern R&D.
Our Team
Quality Control
Quality:Insist on Improvement,Strive for Excellence With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
Quality policy:to enhance the overall level in the field of power transmission
Quality View:Continuous Improvement , pursuit of excellence
Quality Philosophy:Quality creates value
3. Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection; responsible for tracking bad, to monitor the supplier to take corrective measures
to prevent recurrence.
4. Process Quality Control
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend;
found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state.
5. FQC(Final QC)
After the manufacturing department will complete the product, stand in the customer’s position on the finished product quality verification, in order to ensure the quality of
customer expectations and needs.
6. OQC(Outgoing QC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the product
is a product inspection to determine the qualified products.
Packing
Delivery
| Søknad: | Machinery, Agricultural Machinery |
|---|---|
| Hardhet: | Herdet tannoverflate |
| Installasjon: | 90 Degree |
| Oppsett: | Worm and Worm Wheel |
| Girform: | Mark |
| Skritt: | Single-Step |
| Tilpasning: | Tilgjengelig | Tilpasset forespørsel |
|---|
Safety Precautions When Working with NMRV Gearboxes
Working with NMRV (worm gear) gearboxes requires careful attention to safety to prevent accidents and injuries. Here are some essential safety precautions to consider:
- Personal Protective Equipment (PPE): Always wear appropriate PPE, such as gloves, safety glasses, and protective clothing, to protect yourself from potential hazards.
- Lockout-Tagout: Before performing any maintenance or repairs, ensure the equipment is properly shut down and locked out to prevent accidental startup.
- Training: Only qualified personnel with proper training and experience should work on NMRV gearboxes to minimize the risk of errors and accidents.
- Proper Tools: Use the correct tools for the job and ensure they are in good condition. Incorrect tools can cause damage or pose safety risks.
- Adequate Lighting: Work in well-lit areas to enhance visibility and reduce the risk of accidents caused by poor lighting.
- Secure Work Area: Ensure the work area is clean, organized, and free from clutter to prevent tripping hazards and improve overall safety.
- Lubrication: When applying lubricants, be cautious to avoid spills. Clean up any spills immediately to prevent slips and falls.
- Follow Manufacturer Guidelines: Adhere to the manufacturer’s instructions, maintenance schedules, and safety guidelines when working on NMRV gearboxes.
- Electrical Safety: If the gearbox is electrically powered, ensure proper electrical safety protocols are followed during maintenance or repairs.
- Avoid Overloading: Do not exceed the recommended load capacities of the gearbox to prevent mechanical failures and potential hazards.
- Stay Clear of Moving Parts: Keep hands, clothing, and other objects away from moving parts to prevent entanglement or injury.
- Emergency Procedures: Be familiar with emergency shutdown procedures and know how to respond in case of an unexpected situation.
By following these safety precautions, you can help ensure a safe working environment and minimize the risk of accidents or injuries when working with NMRV gearboxes.
Lifespan of an NMRV Gearbox
The lifespan of an NMRV (worm gear) gearbox can vary based on several factors, including the quality of manufacturing, proper maintenance practices, operating conditions, and the specific application it is used for. However, when designed, manufactured, and maintained properly, NMRV gearboxes can have a long and reliable service life.
High-quality NMRV gearboxes that are made from durable materials, precisely machined, and assembled with care tend to have a longer lifespan. Regular maintenance, including proper lubrication, inspection, and addressing any signs of wear or damage, can significantly extend the gearbox’s operational life.
The operating conditions in which the gearbox is used also play a role in determining its lifespan. Factors such as load, temperature, speed, and environment can impact the wear and tear on the gearbox components.
It’s important to follow the manufacturer’s recommendations for maintenance intervals and procedures to ensure optimal performance and longevity of the NMRV gearbox. By adhering to these guidelines and addressing any issues promptly, users can expect an NMRV gearbox to provide reliable service for many years.
Viktige funksjoner i en NMRV-girkasse
NMRV-girkasser, også kjent som snekkegirreduksjonsgir, tilbyr flere viktige funksjoner som gjør dem egnet for ulike bruksområder:
- Kompakt design: NMRV-girkasser er kjent for sin kompakte og plassbesparende design, noe som gjør dem ideelle for installasjoner med begrenset plass.
- Høy effektivitet: Disse girkassene tilbyr relativt høye virkningsgradsnivåer, noe som sikrer effektiv kraftoverføring og redusert energitap.
- Hastighetsreduksjon: NMRV-girkasser brukes primært til hastighetsreduksjonsapplikasjoner, der inngangshastigheten reduseres mens dreiemomentet økes.
- Momentmultiplikasjon: Snekke- og snekkehjulmekanismen muliggjør multiplikasjon av dreiemoment, noe som gjør NMRV-girkasser egnet for applikasjoner som krever høyt dreiemoment.
- Selvlåsende: Den spiralformede utformingen av snekken forårsaker selvlåsing, noe som forhindrer at utgangsakselen driver tilbake inngangsakselen og gir mekanisk låsing.
- Jevn drift: NMRV-girkasser tilbyr jevn og stillegående drift, noe som gjør dem egnet for applikasjoner der støyreduksjon er viktig.
- Bredt utvalg av forholdstall: Disse girkassene kommer i et bredt spekter av girforhold, slik at brukerne kan velge riktig forhold for sin spesifikke applikasjon.
- Lavt vedlikehold: Den enkle designen og få bevegelige deler bidrar til de lave vedlikeholdskravene til NMRV-girkasser.
- Allsidighet: NMRV-girkasser er allsidige og kan brukes i ulike bransjer og applikasjoner, inkludert transportbåndssystemer, matforedling, emballasje og mer.
Det er viktig å vurdere disse viktige funksjonene når du velger en NMRV-girkasse for din spesifikke applikasjon for å sikre optimal ytelse og effektivitet.
editor by CX 2023-10-09