Produktbeskrivelse
Produktbeskrivelse
Main Materials:
1)housing:aluminium alloy ADC12(size 571-090); die cast iron HT200(size 110-150);
2)Worm:20Cr, ZI Involute profile; carbonize&quencher heat treatment make gear surface hardness up to 56-62 HRC; After precision grinding, carburization layer’s thickness between 0.3-0.5mm.
3)Worm Wheel:wearable stannum alloy CuSn10-1
Detaljerte bilder
Combination Options:
Input:with input shaft, With square flange,With IEC standard input flange
Output:with torque arm, output flange, single output shaft, double output shaft, plastic cover
Worm reducers are available with diffferent combinations: NMRV+NMRV, NMRV+NRV, NMRV+PC, NMRV+UDL, NMRV+MOTORS
Exploded View:
Produktparametere
| Gammel modell |
Ny modell | Forhold | Senteravstand | Makt | Inngangsdiameter | Utgangsdiameter | Utgangsmoment | Vekt |
| RV571 | 7.5~100 | 25 mm | 0,06 kW ~ 0,12 kW | Φ9 | Φ11 | 21 Nm | 0,7 kg | |
| RV030 | RW030 | 7.5~100 | 30 mm | 0,06 kW ~ 0,25 kW | Φ9 (Φ11) | Φ14 | 45 Nm | 1,2 kg |
| RV040 | RW040 | 7.5~100 | 40 mm | 0,09 kW ~ 0,55 kW | Φ9(Φ11,Φ14) | Φ18 (Φ19) | 84 Nm | 2,3 kg |
| RV050 | RW050 | 7.5~100 | 50 mm | 0,12 kW ~ 1,5 kW | Φ11 (Φ14, Φ19) | Φ25 (Φ24) | 160 Nm | 3,5 kg |
| RV063 | RW063 | 7.5~100 | 63 mm | 0,18 kW ~ 2,2 kW | Φ14 (Φ19, Φ24) | Φ25 (Φ28) | 230 Nm | 6,2 kg |
| RV075 | RW075 | 7.5~100 | 75 mm | 0,25 kW ~ 4,0 kW | Φ14 (Φ19, Φ24, Φ28) | Φ28 (Φ35) | 410 Nm | 9,0 kg |
| RV090 | RW090 | 7.5~100 | 90 mm | 0,37 kW ~ 4,0 kW | Φ19 (Φ24, Φ28) | Φ35 (Φ38) | 725 Nm | 13,0 kg |
| RV110 | RW110 | 7.5~100 | 110 mm | 0,55 kW ~ 7,5 kW | Φ19 (Φ24, Φ28, Φ38) | Φ42 | 1050 Nm | 35,0 kg |
| RV130 | RW130 | 7.5~100 | 130 mm | 0,75 kW ~ 7,5 kW | Φ24(Φ28, Φ38) | Φ45 | 1550 Nm | 48,0 kg |
| RV150 | RW150 | 7.5~100 | 150 mm | 2,2 kW ~ 15 kW | Φ28 (Φ38, Φ42) | Φ50 | 84,0 kg |
GMRV-konturdimensjon:
| GMRV | EN | B | C | C1 | D(H8) | E(h8) | F | G | G1 | H | H1 | jeg | M | N | Å | P | Q | R | S | T | BL | β | b | t | V |
| 030 | 80 | 97 | 54 | 44 | 14 | 55 | 32 | 56 | 63 | 65 | 29 | 55 | 40 | 57 | 30 | 75 | 44 | 6.5 | 21 | 5.5 | M6*10(n=4) | 0° | 5 | 16.3 | 27 |
| 040 | 100 | 121.5 | 70 | 60 | 18(19) | 60 | 43 | 71 | 78 | 75 | 36.5 | 70 | 50 | 71.5 | 40 | 87 | 55 | 6.5 | 26 | 6.5 | M6*10(n=4) | 45° | 6 | 20.8(21.8) | 35 |
| 050 | 120 | 144 | 80 | 70 | 25(24) | 70 | 49 | 85 | 92 | 85 | 43.5 | 80 | 60 | 84 | 50 | 100 | 64 | 8.5 | 30 | 7 | M8*12(n=4) | 45° | 8 | 28.3(27.3) | 40 |
| 063 | 144 | 174 | 100 | 85 | 25(28) | 80 | 67 | 103 | 112 | 95 | 53 | 95 | 72 | 102 | 63 | 110 | 80 | 8.5 | 36 | 8 | M8*12(n=8) | 45° | 8 | 28.3(31.3) | 50 |
| 075 | 172 | 205 | 120 | 90 | 28(35) | 95 | 72 | 112 | 120 | 115 | 57 | 112.5 | 86 | 119 | 75 | 140 | 93 | 11 | 40 | 10 | M8*14(n=8) | 45° | 8(10) | 31.3(38.3) | 60 |
| 090 | 206 | 238 | 140 | 100 | 35(38) | 110 | 74 | 130 | 140 | 130 | 67 | 129.5 | 103 | 135 | 90 | 160 | 102 | 13 | 45 | 11 | M10*16(n=8) | 45° | 10 | 38.3(41.3) | 70 |
| 110 | 255 | 295 | 170 | 115 | 42 | 130 | – | 144 | 155 | 165 | 74 | 160 | 127.5 | 167.5 | 110 | 200 | 125 | 14 | 50 | 14 | M10*18(n=8) | 45° | 12 | 45.3 | 85 |
| 130 | 293 | 335 | 200 | 120 | 45 | 180 | – | 155 | 170 | 215 | 81 | 179 | 146.5 | 187.5 | 130 | 250 | 140 | 16 | 60 | 15 | M12*20(n=8) | 45° | 14 | 48.8 | 100 |
| 150 | 340 | 400 | 240 | 145 | 50 | 180 | – | 185 | 200 | 215 | 96 | 210 | 170 | 230 | 150 | 250 | 180 | 18 | 72.5 | 18 | M12*22(n=8) | 45° | 14 | 53.8 | 120 |
Firmaprofil
About CHINAMFG Transmission:
We are a professional reducer manufacturer located in HangZhou, ZHangZhoug province.
Our leading products is full range of RV571-150 worm reducers , also supplied GKM hypoid helical gearbox, GRC inline helical gearbox, PC units, UDL Variators and AC Motors, G3 helical gear motor.
Products are widely used for applications such as: foodstuffs, ceramics, packing, chemicals, pharmacy, plastics, paper-making, construction machinery, metallurgic mine, environmental protection engineering, and all kinds of automatic lines, and assembly lines.
With fast delivery, superior after-sales service, advanced producing facility, our products sell well both at home and abroad. We have exported our reducers to Southeast Asia, Eastern Europe and Middle East and so on.Our aim is to develop and innovate on basis of high quality, and create a good reputation for reducers.
Packing information:Plastic Bags+Cartons+Wooden Cases , or on request
We participate Germany Hannver Exhibition-ZheJiang PTC Fair-Turkey Win Eurasia
Logistics
After Sales Service
1.Maintenance Time and Warranty:Within 1 year after receiving goods.
2.Other Service: Including modeling selection guide, installation guide, and problem resolution guide, etc.
Vanlige spørsmål
1.Q:Can you make as per customer drawing?
A: Yes, we offer customized service for customers accordingly. We can use customer’s nameplate for gearboxes.
2.Q:What is your terms of payment ?
A: 30% deposit before production,balance T/T before delivery.
3.Q:Are you a trading company or manufacturer?
A:We are a manufacurer with advanced equipment and experienced workers.
4.Q:What’s your production capacity?
A:8000-9000 PCS/MONTH
5.Q:Free sample is available or not?
A:Yes, we can supply free sample if customer agree to pay for the courier cost
6.Q:Do you have any certificate?
A:Yes, we have CE certificate and SGS certificate report.
Contact information:
Fru Lingel Pan
For any questions just feel free ton contact me. Many thanks for your kind attention to our company!
| Søknad: | Motor, Maskiner, Marine, Landbruksmaskiner, Industri |
|---|---|
| Funksjon: | Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction |
| Oppsett: | Rett vinkel |
| Hardhet: | Herdet tannoverflate |
| Installasjon: | Horisontal type |
| Skritt: | Dobbelttrinn |
| Prøver: |
US$ 12/Piece
1 stk (min. bestilling) | |
|---|
| Tilpasning: |
Tilgjengelig
| Tilpasset forespørsel |
|---|
Safety Precautions When Working with NMRV Gearboxes
Working with NMRV (worm gear) gearboxes requires careful attention to safety to prevent accidents and injuries. Here are some essential safety precautions to consider:
- Personal Protective Equipment (PPE): Always wear appropriate PPE, such as gloves, safety glasses, and protective clothing, to protect yourself from potential hazards.
- Lockout-Tagout: Before performing any maintenance or repairs, ensure the equipment is properly shut down and locked out to prevent accidental startup.
- Training: Only qualified personnel with proper training and experience should work on NMRV gearboxes to minimize the risk of errors and accidents.
- Proper Tools: Use the correct tools for the job and ensure they are in good condition. Incorrect tools can cause damage or pose safety risks.
- Adequate Lighting: Work in well-lit areas to enhance visibility and reduce the risk of accidents caused by poor lighting.
- Secure Work Area: Ensure the work area is clean, organized, and free from clutter to prevent tripping hazards and improve overall safety.
- Lubrication: When applying lubricants, be cautious to avoid spills. Clean up any spills immediately to prevent slips and falls.
- Follow Manufacturer Guidelines: Adhere to the manufacturer’s instructions, maintenance schedules, and safety guidelines when working on NMRV gearboxes.
- Electrical Safety: If the gearbox is electrically powered, ensure proper electrical safety protocols are followed during maintenance or repairs.
- Avoid Overloading: Do not exceed the recommended load capacities of the gearbox to prevent mechanical failures and potential hazards.
- Stay Clear of Moving Parts: Keep hands, clothing, and other objects away from moving parts to prevent entanglement or injury.
- Emergency Procedures: Be familiar with emergency shutdown procedures and know how to respond in case of an unexpected situation.
By following these safety precautions, you can help ensure a safe working environment and minimize the risk of accidents or injuries when working with NMRV gearboxes.
Designprinsipper for en NMRV-girkasse
Utformingen av en NMRV-girkasse (snekkegir) er basert på viktige prinsipper som muliggjør effektiv og pålitelig drift:
- Snekkegirmekanisme: Kjernen i en NMRV-girkasse er snekkeskruen og snekkehjulet. Snekkeskruen, vanligvis sylindrisk i form, går i inngrep med tennene på snekkehjulet. Denne konfigurasjonen gir høye girutvekslingsforhold.
- Spiralgir: Snekkeskruen er vanligvis spiralformet, noe som gir jevnere inngrep med snekkehjulet. Spiralformede gir reduserer glidefriksjonen og støyen som er forbundet med tradisjonelle rettskårne snekkegir.
- Kompakt design: NMRV-girkasser er konstruert for å være kompakte, ofte med en rettvinklet konfigurasjon. Dette gir effektiv plassutnyttelse i ulike applikasjoner.
- Legeringskonstruksjon: Mange NMRV-girkasser er konstruert av høykvalitetslegeringer, noe som gir holdbarhet og korrosjonsbestandighet. Materialvalget sikrer en girkasse som tåler varierende belastninger og miljøforhold.
- Lagerstøtte: Lagre støtter de roterende elementene i girkassen, noe som reduserer friksjon og sikrer jevn drift. Lagrene er strategisk plassert for å håndtere radielle og aksiale belastninger.
- Tetting og smøring: NMRV-girkasser er utstyrt med effektive tetningsmekanismer for å forhindre inntrengning av forurensninger og for å holde på smøreolje. Riktig smøring er avgjørende for å redusere slitasje og forbedre girkassens effektivitet.
- Effektiv kraftoverføring: Snekkegirmekanismen i NMRV-girkasser gir høye girutvekslingsforhold, noe som muliggjør effektiv kraftoverføring samtidig som energitap minimeres.
- Stille drift: Den spiralformede utformingen av snekkeskruen og snekkehjulet bidrar til en roligere drift sammenlignet med tradisjonelle rettkuttede snekkegir.
- Bredt utvalg av forholdstall: NMRV-girkasser er tilgjengelige i forskjellige girforhold, slik at brukerne kan velge riktig konfigurasjon for deres spesifikke applikasjonsbehov.
Kombinasjonen av disse designprinsippene resulterer i en NMRV-girkasse som tilbyr effektiv, pålitelig og stillegående kraftoverføring for et bredt spekter av industrielle applikasjoner.
Industries Using NMRV Gearboxes
NMRV gearboxes find widespread use in various industries due to their versatility and reliability. Some common industries include:
- Food and Beverage: NMRV gearboxes are used in conveyor systems, mixers, and packaging equipment.
- Material Handling: They are employed in conveyor belts, lifting equipment, and automated material handling systems.
- Automation and Robotics: NMRV gearboxes play a critical role in precise motion control and positioning in robotic systems.
- Textile: They are used in machinery for spinning, weaving, and fabric processing.
- Pharmaceutical: NMRV gearboxes are utilized in pill coating machines, mixers, and other pharmaceutical processing equipment.
- Agriculture: They find applications in irrigation systems, conveyor systems, and various agricultural machinery.
- Packaging: NMRV gearboxes are used in packaging machinery to ensure controlled movement and accuracy.
- Automotive: They are used in automated assembly lines and manufacturing processes in the automotive industry.
- Printing: NMRV gearboxes contribute to precise movement and synchronization in printing machinery.
- Energy: They are employed in wind turbine systems, solar tracking systems, and other renewable energy applications.
The adaptability and efficiency of NMRV gearboxes make them a preferred choice in industries that require reliable and precise power transmission solutions.
editor by CX 2023-10-30
