Beschrijving
EPNRV040 Inch-Series Worm Gearbox
The EPNRV040 pairs a 40 mm centre distance with a 3/4 inch UNF-keyway output shaft and NEMA 56C motor flange, delivering 47 Nm rated output torque across ratios from 5:1 through 100:1. This frame is our most frequently specified inch-series unit for general OEM machinery drives at Australian integrators building for North American export, and for NEMA-spec conveyor retrofit applications where the driven-equipment interface is established and cannot economically be changed. The 2.7 kg envelope handles single-person installation on conveyor-side mounting brackets.
EPNRV040 Specifications
Full technical data for the EPNRV040 inch-series worm gearbox. Values verified at end-of-line dynamometer test and retained on serial-number record for five years. Non-standard shaft modifications including hybrid metric-keyway-on-inch-shaft configurations and food-grade lubricant fills are available on request through our engineering desk.
| Specificatie | Waarde |
|---|---|
| Modelaanduiding | EPNRV040 |
| Configuratie | Eentraps wormwielreductor, inch-serie (NEMA-compatibel) |
| Hartafstand | 40 mm |
| Nominaal uitgangskoppel | 47 Nm |
| Reductieverhoudingsbereik | 5:1 tot 100:1 |
| Uitgaande assnelheid (4-polige ingang 1400 tpm) | 14 – 280 tpm |
| Maximaal motorvermogen | 0.37 kW |
| Diameter van de uitgaande as (massief) | 3/4″ (19.1 mm) |
| Uitgangsboring (hol) | 3/4″ (19.1 mm) |
| Uitgaande spiebaan | 3/16″ square UNF |
| Radiale uitgangsbelastingscapaciteit | 2150 N |
| Motorflens – NEMA C-face | 56C |
| Motorflens – IEC (indien ondersteund) | B5 / B14 |
| Mechanisch rendement (ongeveer) | 85 percent at mid-ratio |
| Bouwmateriaal | ADC12 gegoten aluminiumlegering |
| Wormasmateriaal | 20CrMnTi gehard gelegeerd staal, geslepen ISO-klasse 6 |
| Wormwielmateriaal | CuSn12 tinbrons centrifugaal gieten |
| Smeermiddel | Synthetische PAG ISO VG 320 (fabrieksvulling, voedselveilige variant beschikbaar) |
| Asafdichtingen | Viton (FKM) dubbellipsafdichtingen |
| Bescherming tegen indringing | IP55 (labyrint-upgrade beschikbaar) |
| Bevestigingsnorm | UNF (Unified Fine Thread, SAE J429 grade 5/8) |
| Montageposities | B3, B6, B7, B8, V5, V6 |
| Gemonteerd gewicht | 2.7 kg |
Engineering Features of the EPNRV040
Six design characteristics that distinguish the EPNRV040 inch-series worm gearbox from generic metric-only alternatives, particularly relevant where the driven-equipment interface is inch-dimensioned or the installation runs North-American-specified motor and coupling hardware.
UNF Fastener Hardware
Output-cover and mounting-bolt threads are UNF (Unified Fine Thread) across the inch-series range, matching the fastener stock already inventoried by Australian sites operating US-sourced equipment. Metric-threaded variants available on request where the installation is mixed-standard. Fastener torque specifications follow SAE J429 grade 5 / 8 conventions.
Dimensional Retrofit Compatibility
External mounting-footprint dimensions and output-shaft centre-line heights are matched to the published NEMA catalogue equivalents from major US-market suppliers. Direct bolt-in retrofit replacement for aging Boston Gear, Winsmith, Textron, and similar legacy inch-series reducers without machine-frame rework.
ADC12 aluminium behuizing
Die-cast ADC12 aluminium-alloy housing with thermal conductivity three to four times higher than cast iron. Approximately 50 percent of cast-iron weight at the equivalent torque envelope, simplifying handling during installation and retrofit work. Salt-air corrosion resistance without active paint maintenance suits coastal mining, oil and gas, and bulk-terminal installations.
Factory-Matched Worm Sets
Worm shaft and wheel pair are factory-matched, lapped at the production line, and engagement geometry is verified for each serial number before assembly. Replacement sets are supplied as matched pairs for predictable run-in performance. Same worm-and-wheel supply as our NMRV metric range – internal gearing is common, only the external interface differs.
Synthetic PAG Lubricant Fill
Factory fill with ISO VG 320 synthetic polyalkylene glycol. Film viscosity retention from -20 degC cold start through +90 degC sustained sump temperature suits the full Australian operating envelope. USDA H1-rated food-grade lubricant available on request for food and beverage processing applications.
Viton dubbellips asafdichtingen
Viton (FKM) double-lip seals at both input and output shafts. Continuous service rating to 200 degC continuous handles the elevated ambient temperatures inside enclosed motor cabinets and mining-equipment drive housings. Dust-protection lip on the output side prevents fines ingress in mining, grain-handling, and cement-industry applications.
Typical EPNRV040 Applications Across Australia
The EPNRV040 is specified across five primary Australian industry sectors where North-American-origin equipment, inch-dimensional interfaces, or NEMA motor flanges drive the specification. Each industry below represents real retrofit and OEM-build deployments.
Materiaalbehandeling en logistiek
For material handling duty, the EPNRV040 drives roller-bed conveyors, palletiser-cell indexing units and accumulator buffers built to North American OEM specifications or retrofitted onto US-imported handling equipment at Australian DC operations. The inch output shaft with UNF keyway matches existing drive-pulley bushings and sprocket hardware already in service, making the EPNRV040 a straight-swap option where the incumbent reducer is an aging NEMA catalogue unit from a US supplier. NEMA C-flange motor interface accepts the 56C, 140TC and 180TC frames common in imported equipment.
Voedsel- en drankenverwerking
In food and beverage processing, the EPNRV040 is specified into US-imported production lines at Australian dairies, craft breweries and meat processors where the line builder originally supplied NEMA C-flange motors and inch-dimensioned drive hardware. Retrofitting the original reducer with a metric-dimensional unit typically requires expensive machine-frame rework. The EPNRV040 preserves the inch output shaft diameter, UNF keyway dimensions, and NEMA flange spacing of the incumbent, enabling a direct bolt-in substitution at scheduled shutdown without driven-equipment modification.
Milieu- en waterbehandeling
For environmental and water-treatment applications, the EPNRV040 drives screw-conveyor sludge transport, grit-classifier augers and slow-speed mixer reducers at municipal plants operating US-sourced or North-American-specified equipment. The IP55 aluminium-housed construction matches the corrosion and splash-resistance requirement of chlorination and chemical-dosing zones, while the inch-dimensioned output interface lets plant maintenance source replacement reducers without requalifying the full driven-equipment assembly – a meaningful advantage on aging infrastructure where the original OEM is no longer available.
Landbouw en primaire productie
For agricultural applications, the EPNRV040 drives feed-conveyor systems, irrigation-pump drives and grain-handling augers built on US-sourced agricultural implements at NT, Queensland and WA rural holdings. American-branded equipment from John Deere, Case IH and similar manufacturers traditionally specifies NEMA C-flange motors and inch output-shaft reducers. The EPNRV040 is a directly compatible replacement for aging OEM reducers where the original equipment is still in service but the supplier-support chain has become unreliable.
Mijnbouw en mineralenverwerking
In mining and minerals-processing service, the EPNRV040 supports slow-speed feeder auxiliary drives, sampling-equipment reducers and conveyor take-up drives at Pilbara, Kalgoorlie and Central Queensland operations running US-sourced Caterpillar, Joy Global and similar heritage equipment. The inch output shaft with UNF keyway matches the drive-coupling hardware already present in the installation. Marine-grade paint and labyrinth-seal output upgrade are both specified as standard on NEMA-compatible units destined for tropical-coastal bulk-terminal installations, matching the operational envelope of heritage US-spec equipment.
How to Specify the EPNRV040 Correctly
De specificatie voor de inch-serie is gebaseerd op drie interfacecompatibiliteitscontroles, naast de standaard verificatie van koppel-vermogensverhouding: afmetingen van de uitgaande as en spiebaangeometrie, standaard motorflens en compatibiliteit van de montagevoet met een eventueel bestaand retrofit-systeem. Onze engineeringafdeling controleert al deze drie aspecten aan de hand van de door de klant aangeleverde tekeningen of foto's van de installatie voordat een dimensioneringsadvies wordt gegeven.
1. Controleer het koppel en de verhouding.
Required output torque falls within the 47 Nm rating of the EPNRV040. Ratio range 5:1 through 100:1 covers output speeds from 14 – 280 rpm at a 4-pole input motor.
2. Controleer de asinterface
Output shaft is 3/4″ diameter with 3/16″ square UNF keyway. Verify against the incumbent drive-coupling hub bore and keyway before ordering. Hybrid configurations are available on request.
3. Controleer de motorflens
NEMA C-flange compatibility: 56C. IEC option: B5 / B14. Motor input capacity 0.37 kW maximum. Specify motor standard and frame size at quotation.
EPNRV040 Technical Questions
The most common technical questions our engineering desk receives on the EPNRV040 inch-series worm gearbox from Australian specifiers, OEM design engineers, and plant maintenance teams working with US-sourced or NEMA-specified equipment.
What mounting orientations are supported on the EPNRV040?
All six standard mounting positions: B3 (horizontal, input side up), B6 (horizontal, input side down), B7, B8, V5 (vertical, output shaft down) and V6 (vertical, output shaft up). Oil-fill volume is factory-calibrated to the declared orientation – vertical mountings receive additional oil volume to guarantee worm-wheel engagement submersion at start-up. Specify mounting position at quotation stage.
Do you offer NMRV to NRV conversion support for mixed-fleet operations?
Yes. Our engineering desk routinely assists Australian operations with mixed-standard installations (some driven equipment metric, some inch) by verifying the best reducer fit for each drive point against the installed hardware. The NMRV internal gearing is common with the NRV inch-series range, so field spare-parts inventory can be minimised through the single internal-components stock list supporting both product families.
Why specify the EPNRV040 over the equivalent NMRV metric frame?
Choose the EPNRV040 when the driven-equipment interface is inch-dimensioned – output shaft diameter, keyway geometry, mounting-pattern spacing – or the motor available is NEMA C-flange. Common triggers include: retrofitting US-sourced equipment, building OEM machinery for North American export, or matching legacy in-service reducers from Boston Gear, Winsmith, Textron or similar US-market brands. If the interface is fully metric, the NMRV equivalent is generally the simpler specification.
What output shaft dimension does the EPNRV040 provide?
The EPNRV040 output shaft is 3/4″ (19.1 mm) on the solid-shaft version, with a matching 3/4″ hollow-bore option. Keyway geometry is 3/16″ square UNF to standard inch conventions. The dimensional envelope is matched to equivalent-frame NEMA catalogue reducers from major US-market suppliers for direct bolt-in retrofit compatibility.
Can I use an IEC metric motor with the EPNRV040?
Yes. The smaller frames (EPNRV040 025, 030, 040, 050) support both NEMA C-flange and IEC B5/B14 metric flanges through different mounting adapter plates, supplied with the reducer when specified at order. Larger frames primarily support NEMA, with IEC B5 available on request. Specify motor flange standard and frame size at quotation to ensure the correct adapter ships with the unit.
What motor power is typical for the EPNRV040?
The EPNRV040 accepts input power up to 0.37 kW through the NEMA C-flange interface. Actual motor selection is driven by the duty torque, operating rpm, and service factor rather than the catalogue maximum. Our engineering desk will verify motor sizing against the customer-supplied duty profile during quotation, including motor-sizing recommendations from Australian-stocked NEMA three-phase motor ranges.
What Engineers Say About the EPNRV040
Geverifieerde feedback van Australische en internationale ingenieurs die werken met specificaties in inches, retrofits van in de VS geproduceerde apparatuur en NEMA-motorflensinstallaties. De tekst van de beoordelingen is waar nodig geparafraseerd om vertrouwelijke projectdetails te beschermen.
Replaced four end-of-life inch-series reducers from a legacy US-catalogue supplier with EPNRV040 units during scheduled production-line shutdown. The 1-inch output shaft and UNF keyway matched the existing drive-coupling hardware directly, removing a machining-rework line item from the maintenance job scope. Running performance through 8 months of 3-shift duty has been uneventful.
Using the EPNRV040 on production-line conveyor retrofits at sites running US-sourced 1990s-vintage processing equipment. The inch output shaft with UNF keyway match to the incumbent drive hardware removed the machine-frame modification that a metric-replacement reducer would have required. Cost-benefit on the retrofit approach has been strongly positive.
The EPNRV040 is specified into our North-American-market packaging-equipment export platform. NEMA motor flange and inch-dimensional output interface match our US-customer supply-chain hardware. Engineering-documentation quality and factory-test-record traceability support our CE-conformity compilation for dual-market equipment certification.
Carrying the EPNRV040 for European customers supplying into North American markets where NEMA C-flange motor and inch-shaft coupling are the specified norm. The dimensional-retrofit compatibility with US-catalogue incumbents has been verified on multiple customer projects and supply-reliability across 12 months has been consistent.
Running the EPNRV040 on a production-line retrofit that replaced aging US-sourced 1980s-era reducers. The inch-dimensional interface preservation meant we avoided the full drive-train replacement that a metric unit would have required. CIP-tolerant paint system is holding up well to daily caustic-wash exposure across the first operating year.
Gerelateerde inch-serie configuraties
Three related inch-series frames across different torque and shaft-dimension envelopes. If the EPNRV040 is close but not exactly matched to your installation, the alternatives below may provide a better interface fit.
Bekijk het volledige overzicht NRV inch-serie assortiment of vergelijk met de NMRV-metrische equivalenten.
Ready to Specify the EPNRV040?
Stuur uw maattekeningen, foto's of OEM-onderdeelnummers van uw huidige reductiekast naar onze Australische technische afdeling voor een directe controle op compatibiliteit met uw huidige reductiekast. Technische vragen worden beantwoord door de verantwoordelijke engineer voor het product, niet door een algemene verkoopafdeling.
